Heard in VK on 40m QRP again

At 1834z, 30 mins earlier than last night, VK8CH reported my 5W WSPR signal at SNR -27dB, which is 1dB lower than last night. A few hours later, VK8CH copied my 2W (33dBm) 40m WSPR signal at SNR of -24, -27 and -28dB over a period of some 20 minutes. PY2GN has heard me twice tonight already on 30m WSPR, again using 5W. W1XP was copying my 1W 30m WSPR signal at a SNR of-17dB.

All this on 15m of end-fed wire strung from the gutter to the washing line post at the bottom of the garden!

40m QRP WSPR signal copied by VK8CH

This evening, VK8CH (Australia) copied both my 10W, then 5W QRP 40m WSPR signals. DX was 13800kms - not bad for a small, 15m long, end-fed wire strung down the garden only 6m at the highest end and 2.5m high at the far end!

What constitutes a QSO?

Having been experimenting with WSPR beaconing, and having a LOT of fun too, I started to ask what constitutes a QSO?

For example, this evening on 160m I both sent and received callsigns, locator grids, frequencies, power, date, time and reports with G8IHT and G4BOO using WSPR. You KNOW the other station has received it from the on-line WSPR database. This was in WSPR MEPT (beaconing) mode and not using WSPR QSO mode, which I've yet to try.

Now, is this a QSO formally? My feeling is no, yet all details were exchanged and received by both parties. Certainly as much detail as would be exchanged in an EME or MS QSO using modes like JT6M, although no RRRs were sent.

Views please?

6m WSPR testing overnight (Aug 12/13)

Overnight I'll be repeating my WSPR mode MS/Es testing, this time with transmissions on 50MHz running 5W for 20% of the time from around 2100z to 0800z. If you have WSPR software, please set your RX to 50.2930 USB and let it run through the night to see what propagation exists.

UPDATE: Not a single report received or obtained for anyone else on 6m overnight. Then 4 hours later I realised I been plugged into the 10m halo :-(

10m WSPR QRP DX - Perseids MS?

I ran WSPR with 5W out (20%) on 10m overnight and was heard twice by F4VNS in JN36hc (see report screen). Although I did not decode anyone on 10m overnight, this may be because there were few stations active on 10m WSPR. The few whispy traces seen suggest doppler shifting (possible MS)?

Anyone know when the Perseids peaked in Europe? I wonder if between 0230 and 0430z?

JT6m Perseids MS

Just turned on the FT817 and JT6M mode and copied HB9AGE within the first few seconds on a strong meteor burst. There will be plenty more tonight. The picture shows the capture of HB9AGE's CQ call here a few minutes ago. Also heard M0RJV, G4BAO (local) and PA5JS, all on JT6m.

10/6m WSPR

During the next 24 hours I intend to try WSPR mode beaconing on both 10m and 6m to see if I get any success during the peak of the Perseids meteor shower. I've no idea how this mode will work with MS and a basic QRP system with small antennas. Should you get a chance, do set your WSPR system to listen on 10m and 6m and log any reports to the WSPRnet logging site. Set your RX to 28.1246 MHz USB or 50.2930 MHz USB to receive WSPR signals.

Although probably not by MS propagation, my 10m WSPR signal was copied by S51CN tonight at 5w, 1W and then 50mW. At my lowest power setting the SNR was -22dB, suggesting that even 10mW would have been copied, but I've now run out of attenuators so can't get any lower tonight!

Bojan, S51CN kindly sent me a screenshot of my signals in Slovenia (see left).

Joule Thief circuit

This month's Practical Wireless makes reference to something called the Joule Thief circuit which allows a very nearly exhausted single cell battery to run a white LED. The article is in G3RJV's regular column. The nifty circuit only needs 4 parts. For a video describing how to build this, see this YouTube item. Another useful resource is http://www.emanator.demon.co.uk/bigclive/joule.htm from which this image was taken.

6m JT6M reception

A year or two back, during the winter months, I listened to European 6m DX via random meteor showers using the digital mode JT6M, listening on 50.230MHz. Even though I only have a V2000 triband vertical, I heard several countries then with the best DX being EA, I and HA listening for about 30 minutes in the evening. This week there is a meteor shower due around Aug 12th (Perseids?) so I will give it another go to see what can be heard with my basic setup and antenna.
At the moment I don't think it is worth trying to TX as the most I can run is 10W.

WSPR Success

DH5RAE (990kms away) logged my 5W into just the 10m band halo TXing WSPR on 30m a few minutes ago. So, the system is now fully working, despite the appalling antenna for 30m. Then in the next timeslot I was received by OH2BMH (1759kms away). WSPR is going to be one heck of a lot of fun on bands like 10m and 6m with QRP when the bands open up.

LATER: In three sessions of "30m WSPR beaconing" I've now been received in 5 European countries at distances between 594 and 1759kms. The image on the left is of my WSPR log.