Even simpler 80m micro-transceiver!

Just finishing off breadboarding a 12 parts QRP transceiver (plus hi-Z earpiece, xtal and key) for 80m CW. The name is the uu80b.

It is crystal controlled on both RX and TX and the inspiration was the Curumim rig from PY2OHH (see earlier post). TX output is 450mW. The xtal controlled regen RX seems to be quite sensitive too. Unlike my FETer, this rig is full break-in and needs no multi-way TX/RX switching. I have already seen and heard the TX part on the on-line Twente University SDR which is 150 miles away from here in Holland. The rig uses just two 2N3904 transistors and a handful of standard parts.

Currently it is on 3.579MHz but this will be moved to 3.560 as soon as I get another crystal next week. Skeds welcomed!

Isn't ultra-simple QRP construction magic!

500kHz - OR7T in Belgium

OR7T was a new country for my SWLing on 500kHz this evening. He was calling CQ and was called by G3KEV but no QSO resulted (that I heard). Also heard tonight was M0FMT. All stations were on normal speed CW.

Is this the world's simplest transceiver?

My attention has been drawn to this circuit which is, as far as I am aware, the simplest transceiver I have ever seen that is likely to be capable of serious use. It looks like an even simpler version of the well known Pixie circuit but replacing the oscillator and PA with just an oscillator used as the TX and the mixer in a direct conversion RX.

For more information visit PY2OHH's website:
http://py2ohh.w2c.com.br/trx/curumim/curumim.htm

Sunspots are GO

At last there are really clear signs that cycle 24 is on its way at last. It may be a few months before the rising sunspot count and flux levels start to be noticed in significantly better conditions on 10,12 and 15m but this time NEXT year the HF bands will be real fun again. CQWW contest in 2009 is likely to be a very different contest on 10m.

See http://www.dxlc.com/solar/images/solar.gif

OK0EMW beacon on 505kHz

The OK0EMW beacon on 505kHz was audible last night just slightly LF of the DI2AM beacon and visible as a QRSS trace on a waterfall display. This is the first time I have positively identified this signal which is a new country for me on 500kHz listening.

Work on my 500kHz QRP TX has now started, so I hope to have a few mW ERP on the band within a few weeks.

M0KHW was 579 on 502kHz

Ken, M0KHW in Luton was a solid 579 on CW this evening at 1735 when calling CQ on 502.4kHz with 90mW ERP. I did not hear him get any replies though.

G3XIZ on 502kHz RTTY

Using my old pocket PC next to the IC703's LS with Pocket Digi software running I am getting very good copy of G3XIZ over in Biggleswade on 502kHz RTTY. He is only running 250mW to an inverted L antenna. Currently he's sending a list of NoV holders.

CQWW SSB contest - 10m poor so far

Listening on 10m this morning in the CQWW DX contest it sounds a bit marginal with just weakish stations from across Europe audible plus a few Russians and 4X4s. Worked with my QRP EC7AKV, 9A5D, G2F, G0AEV (in Wiltshire by groundwave). Conditions on 10m were even worse after lunch so I called it a day and went out instead. SUNDAY UPDATE - sounds pretty dead on 10m so far apart from G stations plus tropo to ON, PA and MS pings from further Europeans.

These have been the poorest CQWW SSB contest conditions for many years. Next October just has to be better, HI.

Main G3XBM webpages updated

http://www.g3xbm.co.uk has been updated tonight to include the FETer 14 parts 80m QRP rig and to add information about my start on 500kHz transmitting.

SAQ 17.2kHz VLF - testing Oct 24th

There is to be a transmission with the VLF Alexanderson alternator transmitter in Sweden on United Nations Day (Oct 24th 2008) at 09:30 UTC. Start up and tuning from about 09:00 UTC.

This is a good opportunity to try out VLF converters.