FT817 speech processor - English translation

Dave G3YMC kindly did an approximate translation of the German instructions for the Funk Amateur speech processor that I built at the weekend. This may be of use to others building this kit. Dave says this is not a precise translation and does not want to be held responsible if he has made any mistakes!

Incidentally on a local SSB contact with G3KKD this evening I switched from "processor out" to "processor in" and Ian said it nearly blew his head off, so it works, HI.

FT817 speech processor built and working - brilliantly!

DYC-8x7 speech processor tucked under the FT817

This morning I built the Funk Amateur DYC-8x7 speech processor kit that came last week. Total assembly time, taking it slowly, was just 30 minutes with no problems at all. Testing and set-up was easy in the end and the results so far are spectacular.

VHF NFD is running - I'd forgotten this - so this is an ideal time to test the rig with the processor in circuit. Using just my 10m halo - feeder loss is such that it is a good match, if not an efficient antenna, on both 2m and 70cm! - I went on and gave a few points away on 2m and 70cms. Whereas before I would be struggling, contacts came easily. The little speech processor makes a LOT of difference and is an excellent product.

Conclusion: at 34 euros delivered to the UK this represents excellent value for such an effective product.

FT817 speech compressor kit arrives

My Funkamateur BX-8x7 audio speech compressor kit (also known as the DYC-8x7) has now arrived. I was impressed by the speed of delivery and the packaging. The kit looks ideal and straightforward to build. One problem with this design was the RJ45 connector lead, but the latest version has 2 RJ45 sockets already fitted on the module and a ready made lead (with plugs on) to connect between the unit and the FT817. The MH-31 mic simply plugs into the other socket. The actual building should only take about 20-30 minutes.

My only difficulty is in the instructions which is a copy of the original Funk Amateur article  in German. I am hoping someone can translate this for me, or give me a precis with setting up instructions.

DYC-8x7 speech processor kit

Funk Amateur, the German magazine's online shop is selling (after a gap I believe) a neat in-line speech processor kit for the FT817 and similar Yaesu rigs called the DYC-8x7. On http://www.eham.net/reviews/detail/2546 it gets good reviews.

I'd like to order one but cannot understand how to go about it not being a German speaker. Google translate doesn't translate all the words, so I am stuck. If anyone can help I'd appreciate it, or tell me if it is available in the UK.

See http://www.box73.de/product_info.php?products_id=945 .

LATER UPDATE
With a step by step translation using Google Translate I managed to register on the Funk Amateur site and place an order.

Simple speech processing

Recently Peter Thornton G6NGR sent me a number of example circuits for speech processors, some dating back to the 1960s. Anyone who operates QRP SSB on HF or VHF will appreciate how important "punchy audio" is when running low power. One circuit I remember working extremely well was one based on an idea by John Hay G3TDZ. Back in the 1970s I was using 100mW AM on 2m and wanted to be heard across Cambridgeshire. My audio stage consisted of a couple of pre-emphasis stages followed by a hard audio clipper and a low pass active filter. The result was an amazingly punchy signal with barely any change in audio level when talking. The 12dB/octave pre-emphasis helped to ensure that clipping of LF signals did not result in many artifacts within the audio passband. The LPF was essential because the heavy clipping  results in many audio harmonics which would otherwise result in a broadened signal. With just 100mW and a dipole the QRP AM signal was excellent copy across the county. I keep meaning to try the same circuit (if I can remember it) with the FT817. It would produce a mighty punchy QRP signal!