Showing posts with label qrn. Show all posts
Showing posts with label qrn. Show all posts
2 Sept 2014
No 10m Es here this afternoon
Since CT1JTQ (1843km) at lunchtime there has been no Es here on 10m, just exchanging spots with G0LRD (25km) who suffers from an intermittent high noise floor. At this QTH, so far, I have been very lucky with local noise. I know this may not last.
Labels:
10m,
local noise,
noise floor,
qrn,
wspr
8 Nov 2012
MF "swish, swish, swish" interference
In recent months I've been suffering from man-made noise on MF which was not there before. I've a constant S8 noise floor now (it was around S1-2 before) and as I tune from 300-500kHz I get a rapid "swish swish swish" every few hundred Hertz. I think there are frequencies where it is stronger but the new 472-479kHz is BAD, although I still manage WSPR decodes from DK and SM. For CW it would be just about impossible.
Now, I haven't yet tried to systematically work out what this is yet and nor have I tried a small external loop on RX or an E-field probe down the garden.
Before I start to investigate, does anyone have a clear idea what this rapid "swish swish swish" QRM is likely to be? I don't think the source is in my own house and on one side the neighbour's house is currently unoccupied. I have tried the obvious (turning off lights and SMPSUs in my own place) with no success.
Any knowledgeable help would be much appreciated.
Man-made interference at MF and LF is a critical consideration for newcomers. I hope that a new version of the RSGB book "LF-Today" (if one is planned) will give some information on how to search out such sources and some strategies for how they might be mitigated.
Now, I haven't yet tried to systematically work out what this is yet and nor have I tried a small external loop on RX or an E-field probe down the garden.
Before I start to investigate, does anyone have a clear idea what this rapid "swish swish swish" QRM is likely to be? I don't think the source is in my own house and on one side the neighbour's house is currently unoccupied. I have tried the obvious (turning off lights and SMPSUs in my own place) with no success.
Any knowledgeable help would be much appreciated.
Man-made interference at MF and LF is a critical consideration for newcomers. I hope that a new version of the RSGB book "LF-Today" (if one is planned) will give some information on how to search out such sources and some strategies for how they might be mitigated.
Labels:
interference,
mf,
noise,
qrm,
qrn
Subscribe to:
Posts (Atom)