Reliability of radio gear

Tin Whiskers on an IC contact

When I mentioned the eHam review of the KX3 on the GQRP reflector last night most of the replies focused on the reliability of complex modern electronics equipment. Some people believe that with fewer parts and SMA components reliability is higher today than in earlier times. Others, including me, were more circumspect and feel that, unless production processes are well controlled, the danger of failure is higher. There are also potential issues with leakage in small geometry ICs as well as the dreaded "tin whiskers" issue where metal dendrils can grow over time between IC balls. My own experience in mobile radio design and manufacture may have coloured my views. We got it right in the end i.e. getting production processes well honed, but you cannot take process control for granted, ever. The slightest drift in quality can spell disaster, field failures and a ruined reputation.

One thing many people agreed on was this: if you want to be sure of the reliability of your amateur radio equipment then build your own. A simple QRP transceiver, easy to make from many published designs in QRP books, should last a lifetime and will be easy to fix in the unlikely event of something going wrong. There is also nothing quite as satisfying as making contacts with something you have built. Even a simple crystal controlled TX and direct conversion receiver are likely to give FAR more satisfaction than a rig costing £1000 with all the bells and whistles. I still recall the thrill of my first ever hombrew contact across the Atlantic with 800mW CW on 15m using my little Pipit transceiver with 7 transistors total and a handful of parts. This rig was so effective that it was my main station rig for many months. Every QSO, and there were lots, meant something special.

A Czech Chirpy from OK1CDJ

Ondra OK1CDJ kindly sent me some photos of his version of my 10m chirpy transceiver. Currently he is getting around 50mW out, a little lower than on samples made here. I have suggested some things to check and possibly change. I really must find a way of making it chirp less, HI.

See http://translate.google.com/translate?client=tmpg&hl=en&u=http%3A%2F%2Fblog.ok1cdj.com%2F&langpair=cs|en for an English translation of Ondra's blog.