First real radio

In the early 1960s my dad bought a DST100 (ex tank radio from) a local garage. It was deaf and weighed a ton. We took it to a local amateur G3CHN who worked his magic on it and it was my main SWL receiver for several years. 

Looking back, it copied some impressive DX. It was so heavy that my dad made a special shelf for it. I could not lift it on my own. These days a tiny SDR dongle is probably better!

See https://sites.google.com/site/g3xbmqrp3/hf/dst100.

DST100 receiver

Way back in the early 1960s, my very first communications receiver was a war surplus DST100 bought for £7 from a local garage. It was huge and very heavy! It was also very deaf, but Roger Thorn G3CHN managed to breath new life in it and it lasted me for many years.  He probably put in new valves.

It needed 2 people to lift it and was a tank radio made by Murphy. It was certainly built like a tank and could probably have survived a direct hit!

To think now we can get an SDR in a USB stick with better performance and a much wider frequency range.

See https://sites.google.com/site/g3xbmqrp3/hf/dst100

DST100

We all have a tale to tell about how we started. Although I had been interested for several years, my interest was really started when my dad bought me a DST100 receiver from a local garage for £7. It was huge and needed 2 people to lift it. It was "attended to" by local amateur Roger Thorn G3CHN (SK) and this served me well for several years. I think it was designed for use in tanks in WW2.

In the 1950s and 1960s there was a lot of war surplus gear around and many of us used these as a start in amateur radio. Common receivers were the AR88, CR100 and HROs. These days new amateurs often buy a Japanese SSB transceiver.

See https://sites.google.com/site/g3xbmqrp3/hf/dst100

DST100 receiver

My first "proper" HF receiver was some beast! It was a DST100 which covered from 50kHz to just over 30MHz. It took 2 people to lift it. I think it was originally designed for tanks in WW2. It heard some impressive DX much of it on AM.

See https://sites.google.com/site/g3xbmqrp3/hf/dst100

See also https://www.vintage-radio.net/forum/showthread.php?t=78909&page=2

DST100

In the years following WW2, there were plenty of surplus transceivers and receivers around, often in "as new" condition. Also, many built their first TV set using surplus radar gear.

My first real receiver was a DST100 bought from a local garage for £7. It was deaf, but attention by Roger G3CHN soon had it working well. It heard some impressive DX, but weighed a ton.

See https://sites.google.com/site/g3xbmqrp3/hf/dst100

DST 100 receiver

My very first communications receiver weighed a ton (it took 2 people to move it!) and was a DST100. I believe it was made by Murphy during WW2. This receiver, I have since learnt, was designed for intercept listening. It was built like a tank with a huge rotary turret tuning unit. The radio cost £7 from a local garage and it was overhauled (new valves?) by (the now late) G3CHN. It covered from around 50kHz to over 30MHz and heard some impressive DX. I was always puzzled why signals were so broad on the lowest range, not realising at the time that it covered 50 to about 150 kilohertz!  This was in 1962.

At that time there was little amateur band gear available (none from Japan) and lots of us used WW2 surplus gear which was available at low cost from many suppliers. Popular receivers were the AR88 and CR100. Transmitter-receivers included the WS19, WS38 and 52 sets.

Amateur radio in the 1950s and 1960s was quite different with lots of HF AM still and most people building their own transmitters. SSB was in its infancy. In many ways it was the high point of the hobby, although today we are blessed with low cost gear, free software,  more modes and more bands. The hobby means different things to different people. Long may it continue.

See https://sites.google.com/site/g3xbmqrp3/hf/dst100 .