Tried using a 14.3MHz ceramic resonator (in a x2 oscillator circuit selecting x2 at the collector) with the Neophyte derived 10m RX today. Applied the external oscillator to pin 6 of the NE602 and used the on-chip LO as a buffer.
With a 60pF variable capacitor I could pull the oscillator from 28.563-28.641MHz i.e. about 80kHz shift. Adding some inductance in series with the resonator allowed it to pull lower, but I could not make the circuit work reliably with too much inductance. Conclusion so far is that with a ceramic resonator at a better frequency (e.g. 14.23 or 14.24MHz) this would make a neat 10m SSB RX with the Neophyte. A small amount of series inductance would allow around 100kHz shift around the main SSB part of the band.
Next I'm going to try the mixer-VFO using a 32MHz xtal and a 3.58MHz ceramic resonator. This should cover around 28.40 - 28.46 I think.
Showing posts with label ceramic resonator. Show all posts
Showing posts with label ceramic resonator. Show all posts
13 Jun 2009
12 Jun 2009
Ceramic resonator VFOs
David W Searle ZL3DWS sent me a very useful link about the use of ceramic resonators in VFOs. These can be pulled more than crystals but the pulled stability is still better than a VFO. I am trying to use these in a mixer-VFO for my 10m DSB rig. See the webpage by Jack Ponton GM0RWU at the address below. I think taking the output differentially from a tuned circuit across the output pins of the NE602 would be better with a simple link winding down to 50 ohms. http://eweb.chemeng.ed.ac.uk/jack/radio/projects/resnote3.html .
Subscribe to:
Posts (Atom)
