Antenna measurements at 500kHz

Matching my antenna at 500kHz has been a bit hit and miss: my technique, if you can call it that, has been to match the antenna "by ear" on RX, adjusting taps on the ferrite rod ATU inductor, to give me the best S-meter reading on the intermod product on 504kHz. Then, with a 3dB pad between the PA and ATU, carefully tweek the tap settings on the ATU for maximum antenna current measured using a toroid current transformer. The 3dB pad is to prevent damage to the PA during the adjustment process. Up to now this has been OK, but I could really do with a better way of measuring the antenna parameters. I'd really like to get an antenna analyser, but cannot justify the expense. I need to check out some other simple, low cost, techniques.