Current set-up for WSPR, JT65 and JT9-1

This is a photo of the kit currently used. The top FT817ND is used mainly for 2m and 70cms (local FM net, SSB and CW, beacon hunting) and the lower FT817 for WSPR, JT65 and JT9-1 mainly on 6m and 10m. The lower rig is set at 2.5W, but the cable run to the V2000 vertical is lossy on 6m. I use a SignaLink USB audio interface to the PC.  This works well. For all digital modes I use the FT817 on DIG setting via the rear connector.   Sometimes I use the Z817 ATU, which I find very good. With this, I can get onto 5MHz and some other bands.

Best DX (on WSPR) is Australia at 1W out on 40, 20 and 10m and Israel on 6m WSPR (1W ERP).

Not shown (on shelf above) is the 472kHz homebrew transverter, the 15m MFJ Cub and the Mizuho 200mW 2m SSB rig. Also out of sight are a 136kHz beacon, the 2m Fredbox, the 6m Sixbox, the VLF 8-9kHz beacon, and optical rigs. I am waiting for better health to be able to use these again. Currently my operating is all from home and mainly modes not requiring me to talk, although I have ventured onto our Monday night FM net and the odd 2m and 70cm contest.