Showing posts with label ft917. Show all posts
Showing posts with label ft917. Show all posts

21 Mar 2013

The current G3XBM (operating) shack

G3XBM QRP shack in a bedroom corner
Thought readers might like to see what the G3XBM station consists of currently.  In the photo I have annotated most pieces. The little silvery box to the right of the SignaLink interface was a VX2 programmer (software for which crashed my PC a year ago), but this box  is to be used to house my WISPY 10m WSPR beacon transceiver. The K1 was last used yesterday and the FT817 gets almost daily use, with the very nice audio speech processor underneath. Not shown are the lightbeam kit or the LF and MF tranverters for 136 and 472kHz which are housed elsewhere close the the earth-electrode antenna feed. There are also several homebrew rigs in drawers that get brought out from time to time. For the time being, the Elecraft K1 is not being sold.

The maximum power I can run currently is around 7W from the K1 and about 12W out on 472kHz from the transverter (about 5-10mW ERP) and 30W from the 136kHz transverter (about 50uW ERP). I have no great desire to run much more power. The FT817 is only used at 2.5W or less.  

20 Feb 2012

Commercial QRP: KX3 or FT818?

CQ Ham Radio Book
As I've said before here,  I just can't understand why an FT817 successor has still not yet appeared. The KX3 pre-release spec (now nearly 12 months old) gives a good idea of what is needed and Yaesu surely could beat Elecraft on price. Also, Yaesu's alternative is likely to win on size and looks.

Here in the UK, once import duty and tax are added, the KX3 will be expensive, so I am still hoping the FT818 will appear soon and be a more cost effective alternative. I love Elecraft kit but not sure that too many over this side of the pond will shell out over £1000 for a commercial QRP radio. An FT818 at, say, £599 would be a more cost effective investment. I say investment as my FT817 is now 11 years old and been the best amateur radio investment I have ever made.

So, I am still on the look-out for some HARD news from Yaesu Japan i.e. specs, price and release dates. If there are any leaks I promise you that the news will appear on this blog as soon as I get wind of anything. And of course, unlike the KX3 I expect an FT818 would be available as soon as an announcement is made.

The image above is linked from http://www.cqpub.co.jp .