Yesterday I found this wonderful link which is a montage of 40 different old shortwave interval signals from almost 50 years ago. Get a coffee, sit back and listen. Imagine you are listening on your one valve radio in your bedroom in 1964. It brings back such happy memories that I am almost tearful with nostalgia.
G3ZJO has a QRSS3 beacon sending in FSK built in Altoids tins and running QRPp power. This is is a screenshot (from Spectran) of his signal this afternoon. I have superimposed his callsign, which is clearly visible on the upper line. The first dash of the G in his call is missing in my capture.
Want to try something really simple? I am now waiting to have a QSO on 80m CW using my XBM80-2 transceiver that I put together in the week. Pout is 60mW. The only switching between TX and RX is by the morse key. Additional offset can be had with the switch in series with the crystal. Skeds with local stations are being arranged.
"I simulated the antenna based on your description (with MMANA) and the current through the vertical wire seems to be quite constant. So the tophat works well and the effective height will be more or less the physical height. The simulation gives a radiation resistance of 0.074 Ohm, so with 0.12 A a radiated power just over 1mW EMRP (1.75mW ERP). In the real world it will be some dB's less (as Jim stated recently), probably something like 0,5 to 1mW ERP. Very impressive that it covers over 1200km."
International QRP Collection is a new book bringing together articles from magazines around the world on QRP (low power) radio. There are articles on commercial equipment, homebrew ideas, test equipment and operating on bands from 160m to microwaves plus much more. A friend who is not too familiar with QRP thinks it is a good introduction, but I must admit I was disappointed: the collection seems disjointed and, in my view, a better set of articles could have been put together. As an example, the intriguing transceiver on the cover does not appear in the articles inside! Overall, I'd give this one 6 out of 10. The book is available from the RSGB. 
The Pixie and Micro80 are well known simple transceivers for any HF bands. I've built both in the past and they do work well considering their lack of complexity. The main limitation is the receiver which uses the TX PA as a simple mixer. For those wanting more information on the Pixie and its derivatives check out The Pixie Files which is a collection of articles from SPRAT.
Lubos OK2BVG is receiving me well again tonight on 500kHz WSPR. In the last hour two reports received via the database.
Hello Roger, LF!A little later the signal was even stronger:
This moment is just now:
2136 -7 0.2 0.503874 0 G4JNT IO90 23
2142 -29 -0.5 0.503910 1 G3XBM JO02
Congratulation!
Lubos, OK2BVG, JN88KS
