Conditions to Eastern Europe seem good at the moment.
See https://www.tvcomm.co.uk/g7izu/radio-propagation-maps/europe-sporadic-e/ .
Simple QRP projects, 10m, 8m, 6m, 4m, FT8, 160m, WSPR, LF/MF, sub-9kHz, nanowaves and other random stuff, some not related to amateur radio.
Conditions to Eastern Europe seem good at the moment.
See https://www.tvcomm.co.uk/g7izu/radio-propagation-maps/europe-sporadic-e/ .
On the "old" PC I seem to be getting less out on 8m FT8 from the FT817ND despite a low SWR and the power slider on WSJT-X being at maximum. So the output is probably 2W or less to the dipole.
Despite this, it is being spotted by EA8DJR (2994km) in the Canary Is. I called him, but he failed to hear me. I suspect this is F2 rather than Es propagation. With me he is very strong. I was quite surprised to spot him on 40.680 MHz FT8 this morning.
UPDATE 1002z: He called and we worked. EA8JF (2832km) has also spotted me on 8m FT8.
UPDATE 1013z: Now also spotted strongly by EA8RH (3029km). F2 (I guess) is good on 8m this morning.
UPDATE 1038z: With stations in Italy and Spain being granted amateur radio access to the 8m band activity seems to have increased. I just wish more PTTs would see the value.
UPDATE 1206z: G4KFI (60km) spotted. I think my QRP is too weak for him to spot me. I think we are cross polarised, so on inter-G this is probably very important.
UPDATE 1243z: UW8SM (1751km) spotted. I think this station is genuine.
UPDATE 1255z: 4 stations have spotted me today. See map.As my 10m antenna is available I am on 10m QRP WSPR with the signal being widely copied
UPDATE 1022z: Spotted by 14 stations.Map from WSPRrocks by Phil VK7JJ |
This was, perhaps, the biggest set of contests in the world. Even without submitting a score, it gave many a chance to work new countries and US states.
With the demise of CQ magazine, it is not clear what the situation is in 2024. Looking at the website, you could be forgiven for thinking it is still on. However, that information may have been put up ages ago, before the magazine closed.
This is one of my pet hates - not knowing the date the webpages were updated, but that is a different story.
If anyone can tell me if it is on or off, please let me know.
With the "other" Windows 10 PC, everything seems to work on RX, but even though the QDX goes to TX there is no RF being sent. Also, I get a "rig control error" going to TX even though the CAT works and it is "seeing" the QDX. As far as I can see, everything is correctly set and I tried a power cycle on the QDX before starting the PC. It should not be this hard.
Going back to the SignaLink USB and FT817ND I get no issues at all with the "old" PC. For now, I give up.
My 2.5W 8m FT8 is on again. No spots, although I see far more stations are now monitoring the band.
UPDATE 1609z: PJ4MM (7483km) spotted on 8m FT8 RX.
My QRP 10m, WSPR beacon has been on since about 1036z, but no spots of me yet. UPDATE 2125z: 30 stations have spotted me. Now QRT.