Homebrew RF Circuit Design Ideas website

HA5KHC's useful website

Wandering around looking for 50W PA designs for 137kHz this afternoon,  I chanced on a website that I don't remember seeing before by HA5KHC. It consists of a HUGE list of very useful links to other websites arranged by design topic (transceivers, receivers,  etc).   It is a massive list of useful links that I could spend days trawling through for ideas and inspiration.  It was quite flattering to see a couple of my designs linked.

Unfortunately there is nowhere on the page with a contact address for the website owner, although I expect HA5KHC's details will be on QRZ.com.

UPDATE:  Adrian YO5PBG said:

"I believe it is a mirror of the original site... of Iiulian - YO3DAC/VA3IUL - http://www.qsl.net/va3iul/Homebrew_RF_Circuit_Design_Ideas/Homebrew_RF_Circuit_Design_Ideas.htm" 

New frequency for LF QRSS3 beacon : 137.766kHz

Using the strong German commercial station DCF39 on 138.830kHz (it is S9+ with me) as an accurate frequency reference, I have checked the frequency of my QRSS3 QRP beacon and it is running higher up the band than I thought due to the way the crystal is loaded. 

Frequency to look is 137.766kHz   +/- . It should be within 1Hz of this frequency. 

Reports and screenshots (looking now in the right place) would be very much appreciated. I shall leave the beacon running all today at QRSS3 speed.

137kHz E-field probe mag-mount

Tiny E-field probe on the car roof on mag-mount

This is the schematic of my simple mag-mount based E-field probe for 137kHz reception in the car. I use a low cost MPF102 FET and a low cost 2N3904 transistor. Performance seems to be totally adequate, detecting my very low ERP QRSS3 beacon as I drive around the local area up to around 10km (yet to test at greater range) from home. The whole unit is attached at the base of a 15cm whip on a mag-mount stuck on the centre of the car roof. The coax from the EFP connects into an FT817 with the IPO button ON - this makes the sensitivity better on 137kHz, a tip worth knowing.

QRSS3 tests with QRP on 137.685kHz.

This afternoon I started my tests on the 137kHz band again. With my 8W (RF out from the unit - ERP will be uW level) crystal controlled beacon sending QRSS3 feeding the 20m spaced earth electrodes, currently under 8cm of snow, I ventured forth in the car complete with an E-field probe built into the bottom of a mag-mount antenna on the car roof. The E-field probe whip is about 12-15cm long only. It looks like a small UHF quarter wave, rather than an antenna for 2200m! The TX frequency is currently around 137.685kHz and this QRSS3 beacon will remain on overnight. I am hoping that stations out to around 100km will take a look for it.

QRP earth-electrode antenna signal at 8.2km on 137kHz band

Well, results have been spectacular with some excellent signals around 8.2km away in the line of the earth-electrodes. Orthogonally, the signal was not copyable at all at a similar range. This is classic loop directionality again.

/M RX signal at 6km orthogonal to TX antenna.

The receiver consists of the 10-15cm long E-field probe feeding the FT817 with IPO button pressed (improves sensitivity when ON at 137kHz) feeding the PC running Spectran at 0.34Hz resolution.

I do find it unbelievable that such a TX "antenna" buried under the snow with NOTHING in the air at all and with earth rods just 20m apart can put out such a decent signal on the 2200m band.

New ERP calculations on 472kHz with earth-electrode antenna in 8cm snow

With several repeatable ground wave reports on 472kHz WSPR using the earth-electrode antenna, it is time for a recalculation of my ERP based on a formula (for 500kHz) supplied some years ago by M0BMU.  The assumption (from M0BMU, that I am not at all sure is right) is that the noise floor is around 3uV/m in a 2500Hz (WSPR) bandwidth. So, based on the WSPR S/N ratio the field strength when using the earth-electrodes can be calculated.

• G3ZJO at 79km gets me at around -19dB giving my field strength around 355nV/m. 
• G3XDV at 61km he gets me around -12dB S/N giving my field strength around 810nV/m.  
• M0BMU at 69km he gets me around -30dB S/N giving a field strength around 100nV/m

ERP Calculations

• ERP using G3ZJO's results = (E*d)^2 / 49; with E = 355nV, d = 79km   ERP = 16uW
• ERP using G3XDV's results = (E*d)^2 / 49; with E = 810nV, d = 61km  ERP  = 49uW
• ERP using M0BMU's results =  (E*d)^2 / 49; with E =100nV, d = 69km  ERP = 1uW

Now, to me these figures seem far too low, so perhaps the noise level is much higher than 3uV/m. Certainly that is the case here where I have an S4- S8 noise floor due to SMPSUs and other noise sources. I think these numbers can be doubled based on ground wave losses but, even so, the figures appear to be extremely low.  My Marconi antenna is some 8dB (average) better than the earth-electrode antenna and I am sure the ERP is well above 1mW using this antenna.

Conclusions

I am totally puzzled: measuring antenna current on the Marconi I get ERPs that are an order of magnitude higher yet measured results with the earth-electrode antenna average just 8dB down on the Marconi. This suggests ERPs for the earth-electrode antenna in the low mW region, which I find much more believable.

Any thoughts please?

Is this Chinese HF radio a wind up one?

As the person who started the FT818 hare running a year or so back (my thoughts and ideas for an FT817 replacement - thanks to a little Photoshop editing!) , I'm wondering if the attached is real or also a spoof?

It purports to be a new Chinese HF radio retailing for £299. It looks very much like an IC718 with some stickers on. It was brought to my attention by Steve G1KQH who found it at
http://s3.zetaboards.com/copythat/topic/7467118/1/ but the date on this is 2011. Surely if true the radio would be on sale now? Somehow I am of the opinion this is (also) a bit of wishful thinking, but I would be delighted to be proved wrong.

A real Chinese HF radio at this sort of price is not totally out of the question: labour costs are low and there are already some very nice Chinese VHF/UHF handhelds on the market that under-cut Yaesu and Icom by around 100%. It is surely just a matter of time before an FT817 or an IC718 look-alike radio is available from one of the Chinese makers.

UPDATE 1755z: maybe this IS real. See http://www.tradekey.com/product-view/1538868-518398/Hf-Transceiver-ft-808-.html

Back on the earth-electrode antenna on 472kHz

The red dots show where the wire to my far earth rod goes - under the snow!

This afternoon I've installed a coax cable from my operating shack down to the back of the garage where I do my radio building and where I can connect to the earth-electrode antenna running down the back garden. Now I have my 472kHz transverter in the garage too so it can connect directly into the earth-electrode antenna without any matching. Even with 8cm of snow on the ground and nothing of the antenna visible above the snow line (!) this antenna is still radiating a decent signal with reports already this afternoon from G3ZJO (-22dB S/N) and G3XDV (-12dB S/N) at good range. I find it truly amazing this system works at all.

I am signing G3XBM/1 on the WSPR database to distinguish my signal from that transmitted using a Marconi where I use G3XBM.  I hope no-one minds me using this suffix for a short period, but it is very much in the interests of good research. The signal level with G3XDV at 61km is about 8dB weaker on the earth-electrode antenna than on the vertical Marconi.

ILER-40 and ILER-20 QRP SSB transceiver kits

The ILER-40 and ILER-20 are low cost, simple 4-5W QRP SSB transceivers for 40m and 20m from Spain, designed by Javier EA3GCY.  They are designed around NE602 ICs working bi-directionally to save parts.

Built on a 12 x 10cm PCB, they look easy to build.  Details are available at http://www.qsl.net/ea3gcy/ . The price is a snip at just 67.50 euros plus 10 euros shipping. It looks a very well engineered kit.

ILER-40 (and ILER-20) QRP SSB kit from EA3GCY

See http://www.eham.net/reviews/detail/10700 for a number of (very good) reviews of this kit which looks like a neat introduction to QRP SSB operation. Kits now being supplied include a small AGC sub-board. The kit does not include a microphone or case.

IC7100 price

Whilst checking the trade-in value of my Elecraft K1 transceiver with Martin Lynch yesterday (in my case for another FT817), I asked when the IC7100 was likely to be available in the UK and its likely price.  Indications are that the IC7100 is going to be here in the spring with a price tag of around £1700. This does not include the D-star option. Clearly these dates and prices are not certain. It will be considerably more expensive than the IC7000 though. That much is certain.

An IC7100 at that price is rather more than I would want to pay, but if it was to last 12 years like my current FT817 already has, it might be worth it, especially with 4m,  2m and 70cm coverage. On the other hand, a second (additional) FT817 would do all I really need at under a third of the price!

E-field probe mag-mount now built

This morning I decided that it would be better to build the E-field probe for 137kHz RX at the base of the whip directly on the mag-mount base rather than inside the vehicle and having to tune out the cable capacitance. This way,  the cable capacitance is no longer an issue. I built the E-field probe into a small plastic box and arranged it so the whole unit attaches to the mag-mount using a PL259 plug in the bottom of the unit. Radio 4 on 198kHz is an S9+ signal with the mag-mount sitting on the bedroom window-sill with around 10 inches of whip. It appears to be working well.

The present design is a poor man's PA0RDT probe but using an MPF102 and a 2N3904 rather than the better devices used in Rodolph's high IP2/3 design. I may put a tuned circuit in the FET drain to increase the gain at 137kHz and reduce the gain outside the band. I will experiment with this before going out in the car.

Currently it is snowing continuously here, so road testing the EFP and checking coverage of my QRP 137kHz CW and QRSS3/30 beacon will now have to wait until later in the week.

UPDATE: I have modified the EFP so that the FET output comes from the drain with a drain tuned circuit tuned to 137kHz. I have the source resistor not decoupled initially but will consider adding this if I need a little more overall gain as the barefoot FT817 is very deaf on 137kHz.