Following feedback, Rik Strobbe ON7YD updated his list of countries with (or about to get) access to the new MF band as follows:
Monaco (18/05/2012)
Malta (11/06/2012)
Germany (13/06/2012)
Philippines (30/08/2012)
Slovakia (01/09/2012 ?) - special licence(s)
Czech Republic (01/09/2012 ?) - special licence(s)
Sweden (01/10/2012) - special licence(s)
Norway (30/10/2012)
Greece (01/11/2012)
New Zealand (20/12/2012)
Australia (01/01/2013)
Denmark (01/01/2013)
The Netherlands (01/01/2013)
UK (01/01/2013) - available to full licence holders by NoV
Switzerland (01/01/2013)
Finland (early 2013)
Spain (early 2013)
12 Dec 2012
11 Dec 2012
Dell - rubbish service
My wife has a Dell Inspiron 1545 laptop which came with a 4 year hardware warranty. It has a year to run before the warranty expires.
For nearly a year now the hexagonal power connector socket has been intermittent. So today I contacted Dell to get the connector replaced under warranty. The socket is on a small daughter board along with a couple of USB and other connectors. After about 15 minutes on the phone to India I was fobbed off with "this is wear and tear" and I would be charged to get it repaired. A quick look on the net shows pages and pages of people complaining of the same issue. It is a DESIGN WEAKNESS, as clear as day to me.
The power socket is on the side of the PC and it is all but impossible not to put a slight strain on the socket. Older laptops, ones that do not have built-in obsolescence features that is, have the power connector fixed so that any strain on the plug is not transferred to the socket. One laptop I have is now 12 years old and still going strong.
After being passed up 3 levels at Dell in India, I was passed to the Dell Legal Manager and Customer Relations Manager for UK and Europe who again, despite my reasoning, still stood by the "it's wear and tear" statement. It may be wear and tear, but only because with this poor design it impossible not to have wear and tear!
So, I will attempt the repair myself now, following the instructions on the internet from very many others with the same issue.
Dell will never again be graced with my business. Next time I shall buy from a decent manufacturer who listens carefully to customers and who actually cares, assuming there is one!
In my opinion, this demonstrates a total ignorance of how to manage customers well. In my business life I was taught to value customers so they came back again and again. At three levels in Dell, not one of them seemed to understand that a dissatisfied customer rarely comes back and shares his bad experience with at least 10 others. By this blog I hope to reach a few thousand.
Dell (or should it be renamed Dull?) - sorry, but your stance is unbelievable in the 21st century.
I now know what DELL stands for: Do Everything to Lose Loyalty.
For nearly a year now the hexagonal power connector socket has been intermittent. So today I contacted Dell to get the connector replaced under warranty. The socket is on a small daughter board along with a couple of USB and other connectors. After about 15 minutes on the phone to India I was fobbed off with "this is wear and tear" and I would be charged to get it repaired. A quick look on the net shows pages and pages of people complaining of the same issue. It is a DESIGN WEAKNESS, as clear as day to me.
The power socket is on the side of the PC and it is all but impossible not to put a slight strain on the socket. Older laptops, ones that do not have built-in obsolescence features that is, have the power connector fixed so that any strain on the plug is not transferred to the socket. One laptop I have is now 12 years old and still going strong.
After being passed up 3 levels at Dell in India, I was passed to the Dell Legal Manager and Customer Relations Manager for UK and Europe who again, despite my reasoning, still stood by the "it's wear and tear" statement. It may be wear and tear, but only because with this poor design it impossible not to have wear and tear!
So, I will attempt the repair myself now, following the instructions on the internet from very many others with the same issue.
Dell will never again be graced with my business. Next time I shall buy from a decent manufacturer who listens carefully to customers and who actually cares, assuming there is one!
In my opinion, this demonstrates a total ignorance of how to manage customers well. In my business life I was taught to value customers so they came back again and again. At three levels in Dell, not one of them seemed to understand that a dissatisfied customer rarely comes back and shares his bad experience with at least 10 others. By this blog I hope to reach a few thousand.
Dell (or should it be renamed Dull?) - sorry, but your stance is unbelievable in the 21st century.
I now know what DELL stands for: Do Everything to Lose Loyalty.
Digital Audio on HF (1.1kHz bandwidth)
An interesting post on the Southgate ARS blog today about FreeDV, a free to download and use digital modulation system than needs less than half the bandwidth of conventional SSB. It needs audio processing with a PC on both RX and TX. The article includes the quick start guide for set-up and a clip of a QSO using the mode on 14MHz with 25W. Speech quality sounds excellent.
More information at the FreeDV homepage http://freedv.org/tiki-index.php. An important point to note is that the codec and modem are both open source, patent free so anyone can experiment with them and modify them.
At the moment activity is centred on 14.236 MHz.
More information at the FreeDV homepage http://freedv.org/tiki-index.php. An important point to note is that the codec and modem are both open source, patent free so anyone can experiment with them and modify them.
At the moment activity is centred on 14.236 MHz.
Countries with access to 472-479kHz
An interesting post on the LF reflector today from Rik Strobbe ON7YD - OR7T about which countries have, or soon will have, access to the new MF band.
This was Rik's list:
Monaco (18/05/2012)
Malta (11/06/2012)
Germany (13/06/2012)
Philippines (30/08/2012)
Slovakia (1/09/2012)
Czechia (1/09/2012)
Sweden (1/10/2012)
Norway (30/10/2012)
Greece (1/11/2012)
Denmark (1/01/2013)
Netherlands (1/01/2013)
United Kingdom (1/01/2013)
Switserland (1/01/2013)
This was Rik's list:
Monaco (18/05/2012)
Malta (11/06/2012)
Germany (13/06/2012)
Philippines (30/08/2012)
Slovakia (1/09/2012)
Czechia (1/09/2012)
Sweden (1/10/2012)
Norway (30/10/2012)
Greece (1/11/2012)
Denmark (1/01/2013)
Netherlands (1/01/2013)
United Kingdom (1/01/2013)
Switserland (1/01/2013)
10m conditions
After my break away last week I've been doing some 10m WSPRing these last 24 hours and am disappointed with the results: only a few spots from Germany, Israel and the UK of my own signal and just 4X, ZS and DL copied. Conditions seem to be very poor for a December in the peak sunspot period. Looking at the WSPR screen all I am seeing are a few wispy signals not lasting more than a few seconds. Conditions can change rapidly though, so I'll keep the WSPR beacon running whilst getting on with other stuff.
10 Dec 2012
VHF yagis - amazingly high prices
Just browsing the Waters and Stanton website and I noticed some nice yagis for 2m. Rather larger than I could ever consider as the one I was viewing would stretch over my garden and the next two, HI.
.......and then I saw the price.
The 22-element yagi from InnovAntennas (see 22-LFA2-144 22 element 144MHz LFA2 Yagi 3kW (17.001m long) 18.55dBi gain) is a whopping £605.95 !!! Probably delivery is not included either.
Of course, if you want a moonbounce station you may have to buy several of these big yagis, phasing harnesses and booms, plus a large AS-EL rotator, a big tower, low loss cable ....and an expensive rig. This soon looks like a hobby for the seriously rich only.
Now I've no doubt whatsoever this is an excellent antenna that is well designed and optimised, but it is just 20 odd pieces of aluminium, plus a few insulators, nuts and bolts in the last analysis. OK design costs have to be recovered, but the mark-up is a conservative ten times, if not more, on the raw material prices. Is this justified?
We are all different and I am not judging what others should do with their hard earned cash, but it's just not amateur radio (in my view, others will disagree) when you have to pay silly money for rigs, antennas and accessories.
.......and then I saw the price.
The 22-element yagi from InnovAntennas (see 22-LFA2-144 22 element 144MHz LFA2 Yagi 3kW (17.001m long) 18.55dBi gain) is a whopping £605.95 !!! Probably delivery is not included either.
Of course, if you want a moonbounce station you may have to buy several of these big yagis, phasing harnesses and booms, plus a large AS-EL rotator, a big tower, low loss cable ....and an expensive rig. This soon looks like a hobby for the seriously rich only.
Now I've no doubt whatsoever this is an excellent antenna that is well designed and optimised, but it is just 20 odd pieces of aluminium, plus a few insulators, nuts and bolts in the last analysis. OK design costs have to be recovered, but the mark-up is a conservative ten times, if not more, on the raw material prices. Is this justified?
We are all different and I am not judging what others should do with their hard earned cash, but it's just not amateur radio (in my view, others will disagree) when you have to pay silly money for rigs, antennas and accessories.
UK NoV changes
OFCOM has announced some intended changes to the Notice of Variations issued to some radio amateurs in the UK. See http://licensing.ofcom.org.uk/radiocommunication-licences/amateur-radio/full-licence-jan-2013/ . The main changes are to the 5MHz band (more fixed frequencies), the removal of 501-504kHz NoVs and the release, by new NoV application, to the new 472-479kHz band. Changes are expected to come into force from Jan 1st 2013. Details of how to obtain the new NoVs has not yet (to my knowledge) been made known.
9 Dec 2012
Batteries by Royal Mail - some change to rules
Some changes are about to come into force which will affect what can be sent by Royal Mail. It would appear that some rules are being relaxed whereas others are being made more strict and this could have an effect on sending certain items, such as lithium batteries, via Royal Mail.
Steve G1KQH sent me this which he received from Battery Force, a battery supplier:
Steve G1KQH sent me this which he received from Battery Force, a battery supplier:
"From the 10th of January 2013 due to legislation outside our control,
Battery Force will no longer be able to send Lithium batteries using
Royal Mail Post. All Lithium batteries sent after this date, will have
to go by courier. Using couriers will unfortunately increase the
delivery charge for lithium batteries."
The Royal Mail website attempts to clarify the rules here:
At the moment I'm not clear what the implications will be. It does sound a little like "job's worth" and health and safety gone mad although, like all such moves, the intention is good: to make the mail service safer. But before long we will not be allowed to walk across a road because of the danger.
How did we manage in years gone by?
Miracle Antenna products
Although not the world's best performing antennas, the Miracle Whip and its associated variations have their uses when one is looking for a compact and easily tuned antenna for field use. On the higher HF bands the loss compared with a full 1/4 wave is less than might be expected if a decent counterpoise is used (1-2 S points down only).
Recently the Canadian owner, Robert, sadly died after a year or so of health problems. There were some doubts whether or not the company would continue, but it appears it will. Perrin VK3XPT made enquiries about the availability of one of their products, the Miracle Ducker and reported as follows to the Miracle Whip Yahoo Group:
Recently the Canadian owner, Robert, sadly died after a year or so of health problems. There were some doubts whether or not the company would continue, but it appears it will. Perrin VK3XPT made enquiries about the availability of one of their products, the Miracle Ducker and reported as follows to the Miracle Whip Yahoo Group:
UPDATE:
Here is the current status of Miracle Whip stock, globally. I hope this will help someone else here on the group!
- Miracle Antenna do not have any new stock of the Miracle Ducker range. They are waiting on some parts to arrive in the next couple of weeks, which enable them to complete a shipment of new Miracle Ducker TL that they will be sending to Hamcity. This looks to be the only shipment that will be made to any dealer for some time.
- WSPLC.com appear to have some stock, and I have placed an order with them. Fingers crossed that their website is up to date, and showing correct stock levels.
- I have contacted all (yes, all) other Miracle Antenna dealers, and even though some websites are showing stock, this is not actually the case!
So, if you want a Miracle Ducker TL any time soon, Hamcity and WSPLC.com look to be our only and best options. I hope this helps and I will keep the group updated on my progress.
73s
Perrin VK3XPT
8 Dec 2012
Walking in Devon
No posts for a few days as I've been away staying with my 68 year old brother in South Devon. I managed a couple of nice walks along the cliffs and lanes in the cold bright winter sunshine. I believe in the Met Office definition of winter starting Dec 1st. The lanes were VERY muddy but Salcombe, my home town in my childhood was quiet and beautiful.
My Ventus G730 GPS tracker - available for around £34 from Martin Lynch - plotted the 2 walks. One was around 14km and the other 16.5km.
This shot is of the coastal path near Thurlestone. There are a few nice seats on the walk and I have worked some good HF and VHF pedestrian portable DX from them, although I took no radio gear this time.
 |
| My 2 Devon walks plotted using the G730 GPS tracker |
Subscribe to:
Posts (Atom)
