Baofeng UV-3R very inexpensive VHF/UHF handheld

You may or may not have seen the adverts on eBay for the Baofeng UV-3R handheld transceiver. These are available in several colour versions (including the yellow version shown here) for prices between £25-40 including shipping. For example Solidradio of Hong Kong have these available for just £29.90. Reports suggest these are not bad rigs at all.

What I've just noticed is that, the same supplier shows there is a 3 year UK SquareTrade (no matter what) warranty available for £8.49. So, for less than £40 you can buy a dual band VHF/UHF handheld with a decent warranty for 3 full years.  I've heard of some deals, but this takes some beating.

QRP 10m WSPR

As I cannot access my "lab" currently (kitchen refit materials are everywhere!) I am restricted to operating from my shack, so this morning I've been trying out 28MHz WSPR with 500mW out to the halo in anticipation of my QRP WSPR transceiver design coming soon. This will be DSB, so I will need 1W RF out to get the equivalent of 500mW on the WSPR frequencies.

500mW 10m WSPR reports today

Not unexpectedly, there are loads of reports on the screen when I last looked from all over Europe. The best report so far today is +8dB S/N which suggests just 500uW would have been sufficient to be spotted. I know that others have achieved similar, indeed very much better, success when the band is open. What is also intriguing are that I have been spotted within the UK at over 300km, presumably by Es or backscatter, although maybe by tropo?

I have still to finish off the 472/500kHz transverter and write this up before starting on the 10m WSPR rig, but should have the latter done quite soon. It will be fun to have a stand-alone 10m WSPR transceiver running with a little netbook.

Lack of recent posts

My apologies for lack of recent content, but we've been away from the home QTH whilst our kitchen is being refitted. The local builder, a good and reliable person, advised us to go away and avoid the chaos, so we have been exploring Kent and East Sussex from our son's home near Canterbury. No ham gear with me, just the iPod Touch 4g.

Update Aug11th: we have now returned home (PW awaiting me) to find the kitchen almost finished - 2 more days work - and looking good. Problem is access to my "lab" is impossible because of boxes and builders tools. With luck all should be clear by Wednesday when ham radio building can resume.

CW from Mars

The latest NASA rover "Curiosity" apparently imprints JPL in CW on the Martian surface as a result of its tyre pattern. See http://www.tyrepress.com/News/OFFBEAT/25967.html . If I recall correctly my callsign is on a microchip on "Curiosity" (see post last autumn).

MePADS and MeSQUARES

MeSQUARES

MePADs

As a fan of sticking small bits of cut-up PCB material to a solid piece of copper laminate ground plane in most of my projects I get through a LOT of bits of copper laminate. Getting lazy in my old age, I've just ordered some MePADS and MeSQUARES from www.qrpme.com in the USA. These are arrays of pads or IC footprints for dead bug or Manhattan style construction that can be snapped out and glued to the main ground plane making a neat layout possible without a real PCB.

Finally RIP Heathkit

It was a long time finally dying after the last Heathkit amateur radio product was made by this once fine company, but I read today on the Southgate Amateur Radio News page that what was left of the company has now filed for bankruptcy.  Latterly it had been involved in educational systems but funding was drying up.

VE6CN's fine line-up of Heathkit products

Founded in 1926, Heathkit was famous for its kits in the 1950s, 60s and 70s. They were the Elecraft of their day with sound designs and clear step-by-step building instructions.  My first introduction into electronics and radio was with a kit for Christmas 1961. I never looked back thanks to that wonderful product.

I hope VE6CN wont mind me linking to his picture showing his fine line-up of Heathkit products. For a lot more pictures of Heathkit amateur radio products see http://www.ultrawebb.com/OHP/gallery.htm .

Sub-harmonic mixer based 10m WSPR transceiver

My favourite HF band is 28MHz and I often put my FT817 on and run WSPR in the background whilst getting on with other things in the shack. You may be surprised how often good DX reports are received. This ties up the FT817 so I have been rethinking how to make a very simple WSPR transceiver for 28.1246MHz.

One neat idea is to use a 14.060MHz crystal (cheap from GQRP) pulled up to 14.0623MHz (it is possible) and use this to drive a Polyakov sub-harmonic mixer, which needs half frequency drive, in a simple direct conversion receiver feeding a PC sound card via an isolating transformer. The same oscillator, doubled would be fed into a single balanced DSB modulator and a small QRP PA stage. The resulting WSPR signal would appear as a DSB signal , not SSB, so half the power would be wasted but who cares with milliwatts?

The resulting full WSPR transceiver would be extremely small and simple, need no VFO or VXO and could be left running almost continuously when the PC is switched on. This would be ideal with a small netbook PC.

The idea is not new: see for example http://www.qsl.net/d/dl1gsj/html/qrssrx30.html .

Sounds like this is my next project......

Elecraft KX3 user satisfaction poll

A few weeks ago I ran a poll on the Elecraft KX3 Yahoo group asking owners how satisfied they were with the KX3 QRP radio released earlier this year. I don't own one of these radios, but do covet one. Poll results can be interpreted in a number of ways, but I think this is a fair summary:

• 65% of respondents found the KX3 exceeded or far exceeded their expectations.
• 24% of respondents found it met their expectations
• 9% were to some extent disappointed with the product

This is a very high level of satisfaction. Not sure why the total doesn't add up to 100%.

So, will I buy one? Not sure. What is certain is that if I ordered one today I'd be unlikely to see one in my hands much before Christmas such is the backlog and demand.

Updated MF transverter schematic

The current Rev D version of the 10W MF (472/500kHz) transverter is shown below. There are a few changes around the PA and output filter.

Revised 10W transverter schematic (27.7.12)

The Lesser Chirpy 10m CW transceiver

SPRAT 151 had my article on Chirpy, an ultra-simple, very basic crystal controlled CW transceiver for 28MHz. This does work and has even managed a few decent QSOs but, boy, does it chirp! So, today I followed up on an idea I had to reduce the chirp by FSKing the oscillator when on TX. The schematic is attached.

The basic idea is to switch to TX by closing S1 (increases the oscillator output to around 150mW) then key a capacitor in series with the crystal. As the oscillator is on at full power with the key off or on (FSK shift) the chirp goes. There are a couple of disadvantages (a) the rig is no longer full break-in, and (b) when the key is up there is the "opposite" morse about 1kHz up the band, which is wasteful of power and may confuse. Still, this is a "for fun" rig and, with virtually no chirp, a much better radio. As before, a small low pass filter on the output is advisable unless your ATU provides this.

I also adjusted the turns on the main collector inductor finding that a tap 3t from the cold end worked better. You will almost certainly have to experiment with the values of capacitance around the crystal and key to get the right amount of TX-RX offset.

UPDATE 29.7.12: corrected the circuit diagram (crystal going to wrong place!)