Yesterday I reported that I was struggling on FT8 RX on 20m, and other bands like 70cm RX. I knew the PC settings were right as these worked on 6m and 2m, so the issue had to be with the rig settings.
It appeared that the bandwidth settings on bands other than 6m and 2m was 500Hz. Setting this to 3000Hz seems to have fixed the issues. I am now receiving stations on 20m FT8 on 14.074MHz USB digital with the loop on the back of the rig. I have no idea why these settings were as they were. Maybe I can try 160m FT8 with the earth-electrode "antenna" tonight?
On TX with 8W I have not had any spots yet, but at least there are now RX spots from all over Europe on just the tiny loop.
UPDATE 1342z: Best DX on the tiny loop on 20m FT8 RX is RA1OD (2920km). Another CQ call got no spots.
4 Aug 2019
80m QRP - the XBM80-2 transceiver
There is a YouTube video too shown here.
See https://sites.google.com/site/g3xbmqrp3/hf/80m_xbm80
Labels:
80m
Crossing the channel - NOT amateur radio
Today, a Frenchman crossed the channel between England and France by flyboard. I prefer the shuttle!
See https://www.bbc.co.uk/news/av/world-europe-49226353/man-crosses-english-channel-by-flyboard
See https://www.bbc.co.uk/news/av/world-europe-49226353/man-crosses-english-channel-by-flyboard
Amateur signals from the Moon?
Southgate News reports on an AMSAT and ARISS initiative to get amateur involvement in the next NASA visits to the moon. They calculate path losses will be about 30dB higher than low earth orbit stations.
See http://southgatearc.org/news/2019/august/amsat-and-ariss-designing-amateur-radio-system-for-lunar-gateway.htm
See http://southgatearc.org/news/2019/august/amsat-and-ariss-designing-amateur-radio-system-for-lunar-gateway.htm
Labels:
moon,
southgate news
6m FT8 - Es?
Stations spotted today on
6m FT8 RX to 1147z
|
Interestingly, I have so far spotted no stations on 6m FT8 RX. There is no Es (here at least) to the south. Maybe there was Es to the north, but few stations.
You may recall I just use a V2000 vertical omni antenna.
UPDATE 0817z: As there were no spots at all on 6m FT8 RX, yet there were Gs copied I began to suspect my internet connection. I have reloaded WSJT-X to see if this makes things better and reconnected the wi-fi. Still quiet here.
UPDATE 0904z: Just 2 Gs spotted so far today on 6m FT8 RX.
UPDATE 1150z: With 19 stations now spotted on 6m FT8 RX, it looks like there is Es. Best DX spotted is IZ8FDH (1657km).
3 Aug 2019
Flying ants - NOT amateur radio
Black garden ant (Lasius niger). The queens are
much larger than the worker ants.
|
See https://www.nhm.ac.uk/discover/when-why-winged-ants-swarm-nuptial-flight.html
Labels:
ants
Erotica? - NOT amateur radio
Bet you didn't know that my wife's namesake wrote erotic novels? Well, she does! I have to confess I have never read them. I think you can get them via Amazon UK too. A quick look showed 6 pages on Amazon UK of Lapthornes, mostly books by this lady. I have never met her.
A search of Lapthorn on Amazon UK shows 3 pages including books by my nephew Nicholas Lapthorn, who is a geographer.
I bet this post gets quite a few hits!
See https://www.goodreads.com/book/show/1311754.Merc_and_Her_Men
A search of Lapthorn on Amazon UK shows 3 pages including books by my nephew Nicholas Lapthorn, who is a geographer.
I bet this post gets quite a few hits!
See https://www.goodreads.com/book/show/1311754.Merc_and_Her_Men
Labels:
erotica
What am I doing wrong?
Up to now, I had not used my FT991A on any HF band because I had no antennas. Then I remembered I had a small loop antenna that can be tuned anywhere from 40m-10m. OK, I was not expecting great results, but I was expecting to spot stations and be spotted by some. I set the power down to 10W just in case the loop antenna had a power limit. It was some years since I last used this, so could not remember.
As far as I was aware all the FT8 settings were as for 6m, but it sounded different. In the end I spotted nothing on 20m or 30m. I am convinced this is "finger trouble". At some point I will say, "Of course! That is what's wrong.". It sounds like the PC is not getting the audio from the rig, but all the settings seem correct. I am using the SignaLink interface I am currently using on 6m and 2m. Odd.
In the meantime I am back on 6m FT8. On 6m FT8 things sound normal.
As far as I was aware all the FT8 settings were as for 6m, but it sounded different. In the end I spotted nothing on 20m or 30m. I am convinced this is "finger trouble". At some point I will say, "Of course! That is what's wrong.". It sounds like the PC is not getting the audio from the rig, but all the settings seem correct. I am using the SignaLink interface I am currently using on 6m and 2m. Odd.
In the meantime I am back on 6m FT8. On 6m FT8 things sound normal.
Subscribe to:
Posts (Atom)