10 Feb 2014
472kHz TX
Yesterday I wound a loading coil on a 110mm drainpipe for the 472kHz band which should allow me to transmit on the band using my homebrew transverter. The only thing stopping me is fatigue: I get SO tired doing the simplest of things because of my recent illness. With luck, I shall try this later this week.
Labels:
474.2khz,
630m,
transverter,
wspr
6m WSPR
Since last night I have been WSPRing again on 6m using the V2000 vertical and 2W. Apart from good strong reports from G4IKZ at 18km nothing has been reported, including no GDX. I was hopeful that the odd European might have been copied, but no luck so far. G4IKZ gets me very strongly and reports weaker sidebands sometimes +/-100Hz. I am not sure if this is a TX or RX problem. It is only noticeable on very strong signals.
9 Feb 2014
Building skills - still poor
As a result of my stroke, my building skills are still poor. Today I wound a loading coil for 472kHz on a 110mm diameter former and, frankly, it was very hard work and at the end of it I was exhausted. Gradually my strength and stamina are returning, but there is some considerable way to go. I think, for now, I should avoid much experimentation that needs much/any building work.
G4VXE sked on 2m JT65B tonight
At 2000z I have a sked on 2m JT65B with G4VXE in Oxfordshire (IO91). Tim is running 25W to a V2000 vertical and me 2W to a V2000 vertical. I hope we make the sked successfully especially hoping I get copied OK.
UPDATE 2040z: Although I could clearly see G4VXE (with 25-30W) sending JT65B when using Spectran I go no decodes from Tim, which cannot be right. I suspect finger trouble with my software (WSJT9). In the other direction my 2W was only copied as the occasional sync pulse and no decodes. G4VXE would have been workable on CW so I must be doing something wrong at my end with JT65B.
UPDATE 2040z: Although I could clearly see G4VXE (with 25-30W) sending JT65B when using Spectran I go no decodes from Tim, which cannot be right. I suspect finger trouble with my software (WSJT9). In the other direction my 2W was only copied as the occasional sync pulse and no decodes. G4VXE would have been workable on CW so I must be doing something wrong at my end with JT65B.
472kHz spots
My 472kHz WSPR reception continues and I now have 27 unique stations in the log. The latest stations, include HB9 which is also a new country, and the other station a G.
I have also wound a loading coil and hope to TX on the band soon assuming I can match the antenna.
I have also wound a loading coil and hope to TX on the band soon assuming I can match the antenna.
More 10m WSPR
Late this afternoon I was on 10m WSPR again with 2W and the Par 10/20/40 antenna. Yet again, the band was wide open to the USA and Canada with plenty of spots in both directions. Really, at present, 10m WSPR is too easy as DX is always there when I look.
UPDATE 1840z: 2.5 hrs after dark the 10m band was still wide open to the USA but then the transatlantic path suddenly died out.
UPDATE 1840z: 2.5 hrs after dark the 10m band was still wide open to the USA but then the transatlantic path suddenly died out.
Labels:
10m wspr
8 Feb 2014
Stroke
Walking at Anglesey Abbey today |
Any day now I am expecting the DVLA to tell me I cannot drive for 12 months. Luckily I applied for, and got, a blue disabled badge which means we can park nearer to the entrances at National Trust places and supermarkets when shopping.
Labels:
stroke
Transatlantic reception on 474.2kHz WSPR last night - 5888km
It had to happen and did (eventually) last night. WG2XJM (EN91wn) at 5888km was copied 3 times during the night on MF just using the FT817 (no preamp) and the untuned Par 10/20/40 antenna. Signal levels were not great, but as to be expected, at around -30dB S/N.
So far this season, this set-up has now copied 25 unique stations in 8 countries and 2 continents on 474.2kHz WSPR.
So far this season, this set-up has now copied 25 unique stations in 8 countries and 2 continents on 474.2kHz WSPR.
Unique MF WSPR spots over last 2 weeks |
7 Feb 2014
TCXO-9 fitted
This afternoon I fitted the (loaned) TCXO-9 into my FT817. A sign of how my stroke is making me clumsy still, getting the screws back in to the FT817 cover was really hard work, when it should have been easy. TCXO calibration seems spot on. Tonight I am trying to decode G3WKW on 2m WSPR, so far without success even though Bob's signals are clearly visible on the WSPR screen.
UPDATE 2045z: a solid decode of G3WKW (134km) at -24dB S/N no doubt aided by planes over N.London. At least with a warmed up rig fitted with a TCXO-9 my calibration on 2m is spot-on now.
Someone, asked me to measure RX current before/after fitting TCXO-9. Sorry,but I forgot and will not now do this because of my stroke and issues with fitting screws to the FT817 case - at present some things are just too hard for me.
UPDATE 2045z: a solid decode of G3WKW (134km) at -24dB S/N no doubt aided by planes over N.London. At least with a warmed up rig fitted with a TCXO-9 my calibration on 2m is spot-on now.
Someone, asked me to measure RX current before/after fitting TCXO-9. Sorry,but I forgot and will not now do this because of my stroke and issues with fitting screws to the FT817 case - at present some things are just too hard for me.
6 Feb 2014
New DX on 472kHz RX
As of now on 474.kHz WSPR RX, I am up to 24 unique station reports with best DX 1269km from LA1TN in Norway (JP33SA). I still think transatlantic reception (i.e. of a W) is possible if conditions are very good one night.
As an experiment, I may try to excite my PAR end-fed via a ferrite loading coil on TX this weekend to see who can copy me. This would be a very compromised TX antenna.
UPDATE 8.2.14: I cannot find the ferrite rod, so this TX experiment will have to wait.
As an experiment, I may try to excite my PAR end-fed via a ferrite loading coil on TX this weekend to see who can copy me. This would be a very compromised TX antenna.
UPDATE 8.2.14: I cannot find the ferrite rod, so this TX experiment will have to wait.
Subscribe to:
Posts (Atom)