When 10m is wide open it is possible to work thousands of miles on FM but I always found that the competition was too great and therefore the mode is not well suited to DXing. The aim of the 29MHz AM Tenbox is just for very local communications and definitely not for DX working. In my mind I see the Tenbox being a modern version of the old Heath HW19 (the Tener) rig - see the image and data on the Rigpix page
20 Nov 2012
10m local range?
With the 10m AM Tenbox design coming along nicely I'm reminded of the fun we had in the early 1980s with 10m FM using converted CB rigs here in the UK. Using a converted CB radio with 4W FM into a vertical half wave antenna I was usually able to make contact with similarly equipped stations up to around 25-30 miles away pretty regularly. Certainly within a 5 mile radius signals were fully quietened, even to mobiles.
So, I am wondering how I'll get on with 0.5W of 29MHz AM? My expectation is that with a similar antenna (1/2 wave vertical - I currently use a horizontal halo) I should be able to cover 3-5 miles without too much problem. I'm wondering what sort of ranges people achieve with AM CB radios (WITHOUT add-on PAs!) where this mode is legal? Running a few dB more power is no problem if required of the Tenbox design.
When 10m is wide open it is possible to work thousands of miles on FM but I always found that the competition was too great and therefore the mode is not well suited to DXing. The aim of the 29MHz AM Tenbox is just for very local communications and definitely not for DX working. In my mind I see the Tenbox being a modern version of the old Heath HW19 (the Tener) rig - see the image and data on the Rigpix page
When 10m is wide open it is possible to work thousands of miles on FM but I always found that the competition was too great and therefore the mode is not well suited to DXing. The aim of the 29MHz AM Tenbox is just for very local communications and definitely not for DX working. In my mind I see the Tenbox being a modern version of the old Heath HW19 (the Tener) rig - see the image and data on the Rigpix page
WISPY 10m WSPR beacon video
A few people have requested a video of WISPY, my QRP WSPR beacon for 28.1246MHz. This video shows the TX beacon only. I have a companion RX breadboard that works well and at some point these will be combined into a small 10m WSPR transceiver.
Tenbox 10m AM RX video
It is hard to contain my enthusiasm for simple transceivers and super-regen receivers! This video shows just how well the RX breadboard for the little Tenbox 10m AM transceiver works. 1uV (-107dBm) is a very good signal and it will still detect a well modulated AM signal at -120dBm. Selectivity is not good with this type of receiver, which is the main drawback. However for its intended application - a simple transceiver for local nattering across town - it should be fine. Some people use super-regens as the IF stage of AM receivers. If a filter is added ahead of the super-regen IF this overcomes the selectivity issue but makes the RX design more complicated.
Labels:
10m,
28mhz,
AM,
amplitude modulation,
g3xbm,
qrp,
super-regen,
superregen,
tenbox
19 Nov 2012
Tenbox 10m AM rig - a bit more
Although I had little time today, I experimented with adding varicap tuning to the Tenbox AM transceiver's RX section. Only problem was I had no varicaps, so tried using a few different diodes and a transistor as a varicap. 1N4148 and a Germanium diode reverse biased hardly produced any change in capacitance going from 2-12V. I know a 1N4007 works quite well but could not find one. Then I used a 2N3904's base-collector junction and got a few pF of change. In the end I just did as I did in the Sixbox and used a fixed capacitor in series with a 365pF polyvaricon tuning capacitor. This moves the RX frequency as much as I need at around 2MHz maximum.
Labels:
10m AM,
super-regen,
superregen,
tenbox
2 countries worked on 500kHz with JT9-1 mode
Well, the JT9-1 test QSO with G3ZJO was a total success and completed in around 10 minutes this evening. Later, I called CQ on JT9-1 and got a reply from OR7T in Belgium who is 334km away. We worked, exchanging reports and 73s but I am not quite "all with it" with the sequencing of reports, R, RRR etc in JT mode exchanges.I am learning, HI.
The WSJT digital mode JT9-x is certainly an interesting mode. There are a few bugs in the code still, and more bugs in the operator using it (me!) but I am sure to use this mode more in future on 472kHz and 136kHz.
G3ZJO in QSO with G3XBM this evening on 500kHz |
500kHz JT9-1 test this evening
G3ZJO and I have reported each other's 500kHz WSPR signals and each managed to get reports from close on 1800km away but, despite being only 50km or so apart we have yet to work each other on MF. This evening we are going to attempt a WSJT mode QSO using JT9-1 mode with 1 minute TX periods. I'll report back later how we get on!
More Chromebooks
The new Acer C7 Chromebook on the www.cnet.com site |
The main drawback (or is it an advantage?) of a Chromebook is that it uses the Chrome OS and depends a lot on cloud based applications, although quite a lot of applications work off-line too these days.
Certainly for a second PC at home and on the move it has to be a good bet.
Labels:
acer c7,
chromebook,
samsung
18 Nov 2012
472kHz WSPR this evening
After the CW QSO and 500kHz WSPR TXing this evening I switched over to 474.2kHz USB dial WSPR receiving, whilst I watched "Homeland" on TV (BTW, this is a truly excellent US drama series - I don't usually like US dramas). Good signals coming through from the usual suspects, HI. The weaker signal at the bottom of the image is DF2JP.
It sounds like the first UK access to the 472-479kHz band will be for old 500kHz NoV holders, which includes me, on Jan 1st 2013. It is NOT likely the band will be generally available in the UK at that time, but some time later. Even the 500kHz NoV holder access to the new band is not yet certain on Jan 1st 2013. Watch this space!
474.2kHz WSPR this evening |
CW QSO with M0FMT on 500kHz this evening
After the usual reports from all over the place on my 50mW ERP 500kHz WSPR I took a listen around for some CW stations this evening. G3XIZ was calling CQ and listening on 80m crossband, but then I heard Pete M0FMT not too far away in Hitchin calling CQ. He heard my reply and gave me 529 report. He was about 549 with me deep in the noise that remains on the band. A few days ago this QSO would have been impossible because of the local noise here. The offending noise source (central heating controller SMPSU) is switched off!
Barbados on 10m QRP
8P6BX in Barbados |
Subscribe to:
Posts (Atom)