Autumn - NOT amateur radio

Trees at Anglesey Abbey earlier

This afternoon we visited nearby Anglesey Abbey. There are clear signs of autumn all around. Rather surprisingly the dahlia border was still looking good and this is Nov 9th. Many of the trees are shedding leaves.

Rain - NOT amateur radio

Rear lawn and ornamental cherry

For some reason we seem to have had far more rain than normal in East Anglia, UK. The west of England seems to have had better weather.  Is this climate change?

As I write this it is, guess what, raining again. I am not sure if this is why we have such intense autumnal colours this year. The reds seem more intense this autumn.

Autumnal garden - NOT amateur radio

Gradually, the gardens are taking on a more autumnal look. The sunflowers have passed, the apples are ripening next door, we have harvested our crab apples and taken in the sunshade for the winter ahead.  Every season has something good about it and this year the autumn colours are splendid. I hope to run an antenna down the garden for 472kHz. Not visible in this picture is my current 472kHz "antenna", which is a couple of earth rods separated about 12m apart! With an ERP of around 5mW this reached over 1000km last winter. The 472kHz wire or loop will only be in place over autumn and winter and be taken down next spring. Every season has something good about it here in the UK.

Autumn projects

OK, it is only just summer according to the Met Office and already I am thinking about autumn projects. A lot depends on my health - particularly my stamina and giddiness. Some antenna work will need help from local friends unless I make some dramatic improvements. Things on the list include:

• A stacked big wheel antenna for 2m SSB/CW/WSPR, This would be instead of the hand-rotated 3 el yagi. About the same horizontal gain but omni, so better for beacons and contests?
• A decent antenna and ground for LF/MF.
• Some field tests on VLF/136kHz/optical (currently unlikely because of health).
• A better dedicated antenna for 10m WSPR (possibly a magnetic loop).

Overall, I want to make my home set-up as effective as I can before the winter. My health is still my biggest drawback, preventing much practical constructional work.

What next for the autumn?

My thoughts are starting to turn towards amateur radio this autumn.

Unlike in previous years, I cannot imagine being fully fit by then. So, I shall be on the lookout for some new challenges that don't involve driving, don't involve building and probably don't require much, if any, antenna work. Also, it would be helpful if actual talking is kept to a minimum as I find talking very tiring.

I suspect JT65 and JT9-1 will be on the list as I can use (some of) these modes on 630m, 40m, 20m, 10m, 6m, 2m and 70cm with existing antennas.  I may ask for some help to improve my earth electrode antenna for 630m. With luck I may be able to drive again later this year. This means I might be able to restart some field work again.

If you have any suggestions let me know.

Maybe I should try for QRP DXCC on JT65/JT9-1? No talking, use existing antennas and rigs, and a new challenge.

Autumn projects - an update

Well, I don't seem to be getting on too well with my autumn project list! The 472kHz transverter got finished, as did the WSPR beacon rig for 10m. I also managed some VLF earth-mode work. However, I've still to get back to the 481THz (lightbeam) over-the-horizon tests using the new higher power Phlatlight 5W LEDs. Neither have I rebuilt my 10m halo or erected a proper RX antenna for LF and MF. Mind you, I've added a new project, the Tenbox 10m AM transceiver, which is progressing quite well so far.  In the end it doesn't matter what gets done and when as long as I'm enjoying the hobby and experimenting with simple ideas.

Burwell Steven's Mill © Copyright Rodney Burton and licensed for reuse under this Creative Commons Licence.

Around the middle of 2013, if things go to plan, we are moving home to a bungalow in the same village which is located on the "hill" (this is a relative term in East Anglia!) next to Burwell windmill and museum. The windmill has just received a National Lottery grant and should be fully restored to full working order with 4 sails. This will be about 20m from our front door! I'll expect to be asked to do a "windmills on the air" weekend, HI. Burwell Museum is really something quite special and well worth a visit.

With what will be a much better VHF and UHF take-off I will be tempted to get much more active DXing on 2m, 70cm and 23cm from the new QTH. This is likely to bring a whole new set of challenges.

Autumn Projects Update

About 6 weeks ago I listed a number of projects that I wanted to do this autumn. Here is a progress report.

1. Finish the 472kHz transverter and write this up. DONE
2. Simple 28MHz QRP WSPR transceiver to use with a netbook. DONE (but the TX only beacon is boxed)
3. Stand alone 137kHz receiver (for use with PC).
4. Semi-permanent E-field probe antenna and on-line 137kHz/472kHz grabbers
5. More non line-of-sight light beam experiments (get better distances). 12W Phlatlight LEDs and more sensitive SRF213 detectors ordered
6. Semi-permanent 481THz QRSS beacon for NLOS light beam tests.
7. Alternative HF antennas - maybe re-erect my Par Electronics 40/20/10 end-fed.
8. Further earth-mode (ground conduction) experiments - tests at around 30 and 73kHz as well as more tests at VLF aiming to improve best though ground DX (currently 6km with 5W). More permanent earth-mode "antenna" erected.
9. Experiment with horizontal loop antenna on TX at VLF (maximising coupling into ground).
10. Build some better LF/MF test gear such as resistive SWR bridge, 50W dummy load and a noise bridge.

So, the next project is probably going to be (3) a stand-alone 137kHz receiver combined with some E-field probe development. What I am hoping to do is make a 137kHz RX that can be run from home uploading to an on-line grabber and that can also be used in the car with a roof mounted E-field probe antenna. This will allow me to do some fairly accurate field strength measurements with various TX antennas. With a bit of care I should be able to make this work on various bands from 8.97kHz through to 500kHz.  What I am hoping to be able to do is have a car-mounted receiver with PC that can be used for "drive around" tests although this will depend a lot on the LF noise in the car when the engine is running. I may have to limit tests to static ones with the car electrics not running.

Autumn project list

My wife often calls me a "fireside fusilier" as I am always gunner (going to) do this or gunner do that.

Well here is my current projects ideas list, some of which I hope to address in the coming weeks and months. How many will be replaced with other ideas first?

1. Finish the 472kHz transverter and write this up.
2. Simple 28MHz QRP WSPR transceiver to use with a netbook.
3. Stand alone 137kHz receiver (for use with PC).
4. Semi-permanent E-field probe antenna and on-line 137kHz/472kHz grabbers
5. More non line-of-sight light beam experiments (get better distances).
6. Semi-permanent 481THz QRSS beacon for NLOS light beam tests.
7. Alternative HF antennas - maybe re-erect my Par Electronics 40/20/10 end-fed.
8. Further earth-mode (ground conduction) experiments - tests at around 30 and 73kHz as well as more tests at VLF aiming to improve best though ground DX (currently 6km with 5W).
9. Experiment with horizontal loop antenna on TX at VLF (maximising coupling into ground).
10. Build some better LF/MF test gear such as resistive SWR bridge, 50W dummy load and a noise bridge.

I'll give you all a progress update in about 6 weeks time!