26 Feb 2015

10m SSB with the Lincoln Mk2

This afternoon, I have been trying out the President Lincoln Mk2 (V3) which arrived early today. I have only tried on SSB but it seems to work, with the first SSB QSO being with N8II in West Virginia at about 1430z. He was using 800W and a 5 element beam! It was hearing plenty from Asia, Europe and North/South America. Maximum claimed power from the Lincoln, controlled by a rotary control on the front panel, is 31W  PEP on SSB.

Lincoln Mk2 with the other rigs
I have still to fully get to grips with the menu but it seems pretty intuitive.  There is a choice of display backlight colours, but I find green easiest on the eyes. The other choices are blue and orange. You can alter display brightness and lots of other features - I shall have plenty of time to play.  Blue is not good for my eyes on either the Lincoln Mk2  or the FT817. To my eyes, blue is hard to see, whereas the green is very clear.

My biggest issue was getting the power leads attached to the PSU.  Before my stroke this would have been trivial.  Now it tires me out! I wanted several rigs attached to the PSU at the same time so soldering the plugs on was non-trivial. As you know, speaking too long exhausts me,so I am taking a break.

I am waiting for my 12V battery to charge to test the 40m Pixie. Visually the Pixie build looks fine.

At the moment I am not on WSPR on any band.

3 comments:

G1KQH said...

Looking good! Time to give us an updated Youtube Vid then..

73 Steve

PE4BAS, Bas said...

Looks very nice Roger. Good luck with it. 73, Bas

Bert, PA1B said...

Hello Roger, take you time and enjoy. Good to see that you made an SSB QSO. Have fun. 73, Bert