My QRPP 10m WSPR signal is on again.
UPDATE 1706z: No spots all day. I have definitely concluded that 500uW 10m WSPR only works when (a) conditions are very good, and (b) the RX noise floor is low.
Simple QRP projects, 10m, 8m, 6m, 4m, FT8, 160m, WSPR, LF/MF, sub-9kHz, nanowaves and other random stuff, some not related to amateur radio.
My QRPP 10m WSPR signal is on again.
UPDATE 1706z: No spots all day. I have definitely concluded that 500uW 10m WSPR only works when (a) conditions are very good, and (b) the RX noise floor is low.
For reasons I do not understand my 8m dipole has gone to resonance at about 49MHz. It is simpler to replace the antenna and coax. Assuming the weather is OK, I may try doing this in the next week.
At the moment I am inclined not to apply for an 8m TX permit again, but instead concentrate on ISM rules and WSPR. In the UK this means 10mW ERP and compliance with IR2030. In the UK this is totally free (no licence needed) and I believe open to all. As long as there are people monitoring, much of Europe should be within range on 8m WSPR in the Es season.
Our local bowling club is under threat of closure. There are too few people to look after the grass as people age. The grass looks perfect at the moment.
Talk about a sucker for punishment! Once again I am trying 10m WSPR with 500uW (0.5mW). No spots.
UPDATE 1456z: No spots.
So far this morning 12 stations have spotted me with the furthermost 3W9T (9944km) in Vietnam. It seems when the MUF goes this high my ver...