New Address with OFCOM

This evening on-line I notified the TV licence people of our upcoming address change as well as notified OFCOM of my new address.  It is now unlikely I shall make any further QSOs from my current QTH as the last remaining antennas will be coming down next week. Getting my VHF/UHF vertical up is a priority at the new QTH although there are a few more pressing issues to deal with first - like getting some carpets on the floor!

On the front cover of Practical Wireless this month

Well, I had quite a surprise when the Sept 2013 edition of Practical Wireless (PW) magazine dropped on the mat in the post this morning. Although I knew my review of the Wonderwand Wonderloop was inside, I did not expect my bald head to be the subject of the main cover image! My wife Lis took the photo in the back garden of our current home.

I hope those reading the Wonderloop review will think it a fair one. The loop is tiny and uses thin 1mm wire, yet the performance was actually pretty good considering its size, averaging a couple of S-points down on a decent back garden antenna. As the review shows, some good results were obtained.

May I recommend you buy PW as there is a reasonably decent selection of articles in it most months. It is now the only independent amateur radio magazine published in the UK. I do miss the old Short Wave Magazine which was a good magazine in its heyday back in the 1950s and 1960s.

20m WSPR with 0.5 to 2W

As I wind down activity from this QTH before my move, I have been allowing my WSPR beacon to run on 20m using an indifferent wire antenna strung to a low tree at the bottom of the garden. At its lowest point is is only about 2m above ground. Power out has been 500mW or 2W. The results below speak for themselves: WSPR spots from across the planet.

20m WSPR unique spots in last day or so

These are just some of the unique spots: the actual list goes on and on down the page. I am a real fan of WSPR for checking rigs, antennas and propagation. It is also a way to still enjoy the hobby whilst packing up books, CDs, DVDs and other household rubbish in preparation for a house move!

Reflex Receivers

In the days when semiconductors were very expensive parts, the reflex receiver was a very popular design for AM broadcast and simple amateur AM receivers. The basic idea is to use a single transistor is several different ways: as an RF amplifier, possibly a detector and then finally as an audio amplifier by clever feeding of the RF and AF signal back around the transistor. Even today they are fun circuits to try. For example, see the schematic at http://www.ke3ij.com/reflex.htm . Rick has a number of novel circuits on his site.

http://www.ke3ij.com/reflex.gif

In Rick's circuit, Q1 first acts as an RF amplifier. The 1N4148 rectifies the signal which is again applied to the base of Q1, which is now used as an AF amplifier stage. Although adaquate level is available on the collector of Q1 to drive a high impedance earpiece, Rick added another low cost stage to drive an 8 ohm speaker.

Another example of a reflex circuit is at http://www.sm0vpo.com/rx/reflex_rx.htm . Perhaps the most famous reflex circuits came from Sir Douglas Hall in a series of circuits in Radio Constructor back in the 1960s and early 1970s. Some of these are collected at http://www.spontaflex.free-online.co.uk/ . Sir Douglas was a UK overseas diplomat and a very nice gentleman. One of my old school friends lived in the same Devon village and visited him to try some of his prototypes.

Speech processors

Earlier today someone asked me to forward them some links I had on speech processors. This reminded me of a VERY effective speech clipper I built many years ago for a 2m AM QRP transmitter. The audio pre-amp had 2 stages of 6dB/octave pre-emphasis followed by very hard clipping and an active low pass filter to keep >2.5kHz audio levels to very low levels. The signal sounded remarkably punchy and allowed this little 100mW AM transmitter to punch well above its weight. It sounded like a rig running several watts. At some point, after we move, I'd like to replicate the design and give it a go again. It was based around the audio stages I used in the Pye PF8 PMR handheld but with value changes to increase the gain and add the second pre-emphasis stage. Double pre-emphasis meant that there was less clipping at lower audio frequencies and more at the higher end. Compressors are meant to be better, but honestly this little circuit took some beating.

Satellite tracking app (free)

The always interesting Southgate ARS News page has a link to a free app by Tom W9KE for iPhones, iPads and iPod Touch devices to allow tracking in real time of satellite passes. The app has a nice user interface and looks to be extremely useful if you enjoy tracking satellites and the ISS as well as want to work through some of the amateur radio satellites up there.  The App is available from https://itunes.apple.com/us/app/satellite-explorer-pro/id669039200. The only thing the app seems to miss is a list of the amateur satellite frequencies (up/down) and their modes of operation. I guess one has to look this up somewhere else. 

Thunderstorms and Es

Sporadic-E (Es) is an exciting propagation mechanism that allows contacts on the HF and VHF bands out to around 2000km regularly (with multi-hop Es MUCH greater ranges can be covered) in the April-Sept period in the Northern Hemisphere. There is another smaller peak around Dec/Jan too and propagation by Es can occur at others times of year, but much less frequently. Exactly what creates good Es conditions is open to debate still but some believe thunderstorm activity in the troposphere can impact it.

http://images.blitzortung.org/

A way of checking on thunderstorm activity is to look at the map at http://www.blitzortung.org/Webpages/index.php?lang=en .  Right now there are plenty of thunderstorms over northern Europe with lots over the UK earlier, spreading northwards. Looking at the map one might expect good conditions towards Italy and Greece on Es if whatever rises from the tropo region reaches the E layer mid-path.

My internet saga continues - positive outcome on cable at new QTH

Yesterday I reported that at the new QTH our new home was the only one on the close that was unable to get fibre optic broadband, phone and TV services from the provider I currently have used for over 12 years: Virgin Media.

Well, today their field engineer surveyed the road and has confirmed that we WILL be able to get cable services at our new place after all. They were very quick checking this - I only asked yesterday - and it looks like everything will be ready for when we move mid-August.

KX3 purchase?

For the last 6 months I have been saving the pennies in my amateur radio kitty towards the purchase of a new transceiver for general use at the new QTH. I am still very tempted to splash out on a new KX3 from Elecraft, despite the high UK cost when fully loaded with auto-ATU, narrow roofing filter, battery pack, charger and mic. As I tend to hang on to gear for a LONG time, this may be a good investment. All the www.eHam.com reviews are very good and it does appear to be a first class radio. What bothers me though is that for the same price I could buy 2 FT817 transceivers and still have change! My main interest is e weak signal mode experimentation and I am not sure that the KX3 is an ideal radio for use as a base rig for this application: there seems to be a need for lots of cables to connect to a PC, whereas the FT817 is easy using a Signalink USB interface.

As was the case when pocket calculators came on the market in the 1970s, the default position here is to "wait and see", which means I buy nothing and hope that a clear winner becomes obvious in the months ahead. In the 1970s I ended up not buying a scientific calculator at all, HI.

Ending operations at this QTH

Nearly the end of an era (37 years) at this QTH. I will resist taking down the antennas until the last moment in a few weeks from now, but already my mind is turning to the new QTH.

Would you believe it, but every house in Mill Close, Burwell is able to get Virgin Media apart from ours! Even next door they have it.  I contacted Virgin Media who have agreed to send out a field engineer to check why this is. The CATV box on the pavement is about 4m from our drive. It is not the end of the world: I can revert to Sky (or BT) phones, TV and broadband and get over 10M download speeds but I will wait until the VM engineer feeds back his findings as it would be preferable to stick with our current provider. Virgin's broadband is VERY reliable and fast.

I now have a firm plan on where to erect the VHF/UHF antennas. The earth electrode antenna for VLF/LF/MF will be installed in the next few weeks. I have still to decide on the location of HF wire antennas in a way that is "sleuth" i.e. low profile and not obvious. Our new patio is right outside my new shack, so operating in the garden should be very easy and fun.