Whenever looking to purchase a new radio or kit, I visit the reviews section at www.eham.net to read what others have to say about their purchases. Occasionally the review average scores are skewed by one bad experience (when the usual score is 1 out of a possible 5 maximum), but overall a good impression can be gathered. For example, the Rockmite scores 4.9 out of 5 with 76 reviews, which is impressive.
Reviews of QRP radios can be found at http://www.eham.net/reviews/products/22 .
24 May 2013
Some HF beams spotted in HB9 land
http://www.inqua2011.ch/ |
Yet again we were struck by the cost of things in Switzerland: postcards around 1-2 francs, 2 francs to use the station toilet (ouch!), a coffee around 4.20 francs and 8.50 francs for a bowl of goulash soup. The exchange rate is currently around 1.46 Swiss francs to the UK pound but the tourist rate is somewhat poorer. Luckily the Great Rail Journeys holiday includes almost everything apart from lunches and a couple of dinners. I can recommend them.
For the first time, a couple of HF beams were spotted on the way to Bern: one was a 4 element HF beam with a 2m crossed yagi above (useful in this rugged, mountainous landscape) and the other a 4 element HF quad.
Tomorrow we head home via the TGV from Geneva to Paris and Eurostar to London.
Labels:
bern,
great rail journeys,
hf beam
23 May 2013
Swiss rail holiday continues
The Matterhorn |
Labels:
glacier express,
matterhorn
20 May 2013
Rail holiday in Switzerland
As I am currently in Switzerland on a Great Rail Journeys rail holiday (without amateur gear), posts this week will be infrequent. Having a good time though combining rail travel with excellent scenery. Currently based in Chur for 3 nights and travelling to Arosa by train today. Later this week we travel on the Glacier Express narrow gauge line across the country towards the Zermatt area.
My blog on the holiday (adding to it each day) is at http://hb9trip.blogspot.co.uk/
My blog on the holiday (adding to it each day) is at http://hb9trip.blogspot.co.uk/
Labels:
great rail journeys,
hb9,
railways,
Switzerland
15 May 2013
28MHz BitX SSB transceiver
http://www.qrpkits.com/images/bitx20acase1.jpg |
What would be really nice would be a version for the 10m band where 6-8W would be enough to work the world when the band is open. The IRF510s would need to be changed to a Mitsubishi power FET such as the RD16HHF1.
Does anyone know if a 10m BITX has been done or if a kit is available for this band?
Labels:
bitx,
ssb,
transceiver
37 and 73kHz tests through the ground?
Further to my comment on VLF WSPR, I am still thinking about doing some earth-mode (through the ground) transmission tests at a couple of frequencies between the 8kHz dreamer's band and 136kHz. I'd like to test in the old 73kHz band (legal with earth mode and minimal radiation) and possibly around 37kHz too. A radiated test in the old 73kHz band would not be legal despite low uWs ERP unless I applied for the modern equivalent of a testing and development licence and paid £50 a year, stupid for a couple of tests taking a few hours. Getting MoD approval for that would likely take months and months too.
As my FT817 does not cover this frequency range, and the frequencies will be too high for direct sound card reception, I shall have to build an up-converter for the FT817 with a couple of front-end filters to pre-select the desired LF frequencies or a down converter to feed a sound card directly. A loop, E-field probe or earth electrodes would be used on RX ahead of the converter with the eventual output feeding a PC running appropriate weak signal software (Spectrum Lab, Spectran, WSPR etc).
I made a request to OFCOM very many months ago to permit me to do some low ERP radiated tests in the band between 9 and 136kHz on the basis that the potential for interference with very low ERP (uWs) and transmissions lasting no more that a few hours at a time would be extremely low. Such a request required lateral thinking and empowered decisions. Many, but not all, people at OFCOM seem incapable of making common sense decisions any more. They are also hindered by stupid bureaucracy. Ho hum.
As my FT817 does not cover this frequency range, and the frequencies will be too high for direct sound card reception, I shall have to build an up-converter for the FT817 with a couple of front-end filters to pre-select the desired LF frequencies or a down converter to feed a sound card directly. A loop, E-field probe or earth electrodes would be used on RX ahead of the converter with the eventual output feeding a PC running appropriate weak signal software (Spectrum Lab, Spectran, WSPR etc).
I made a request to OFCOM very many months ago to permit me to do some low ERP radiated tests in the band between 9 and 136kHz on the basis that the potential for interference with very low ERP (uWs) and transmissions lasting no more that a few hours at a time would be extremely low. Such a request required lateral thinking and empowered decisions. Many, but not all, people at OFCOM seem incapable of making common sense decisions any more. They are also hindered by stupid bureaucracy. Ho hum.
VLF WSPR test
Now I have a second small PC (a small Asus X101CH netbook) the possibility exists for me to try some VLF earth mode tests with WSPR. Although I did receive G6ALB 3km away on 8.97kHz through the ground when Andrew was running around 40W, I have never tried looking for my own signal using WSPR at VLF. Theoretically it should be about as good as QRSS10, so quite weak signals may be detectable.
One idea I have is to TX the actual WSPR tone frequencies at baseband through the ground using my small 5W VLF transmitter. Using either my loop antenna or E-field probe on the car retuned to around 1.4-1.6kHz VLF, I can take some trips into the field to see how things work out.
With stability not being an issue I could even try WSPR15 (15min TX) which has performance close to that of QRSS30. Mind you, waiting at a test site for at least 15 minutes for a result could be tedious. This is where some local help from other decently equipped VLF listeners within a 10-20km radius would be very useful.
One idea I have is to TX the actual WSPR tone frequencies at baseband through the ground using my small 5W VLF transmitter. Using either my loop antenna or E-field probe on the car retuned to around 1.4-1.6kHz VLF, I can take some trips into the field to see how things work out.
With stability not being an issue I could even try WSPR15 (15min TX) which has performance close to that of QRSS30. Mind you, waiting at a test site for at least 15 minutes for a result could be tedious. This is where some local help from other decently equipped VLF listeners within a 10-20km radius would be very useful.
Back on 10m WSPR with WSPY TX
Unique 10m WSPR spots using WIPSY TX today |
I have still to put the TX and RX parts of this project together (both parts have been separately tested) as a full WSPR/PSK31 transceiver for 10m.
Struggling on 20m CW
Although calling CQ and hunting can be fun with QRP, it can be very frustrating with less than 1W and an indifferent antenna when conditions are poor and activity low.
G4ILO is 60 years old
Julian G4ILO - 60 yrs old on May 14th - with XYL Olga |
See http://onefootingrave.blogspot.co.uk/
Labels:
blog,
g4ilo,
one foot in the grave
Subscribe to:
Posts (Atom)