29 Jan 2010
76th unique signal report on 500kHz with 1mW (or less) QRP
This evening, I was WSPR decoded by a new station in the Netherlands PI4Z in JO11wm at 260kms. This brings the total number of stations who have sent me reports on the band to 76 now (72 via the WSPR database, 2 emailed WSPR reports and 2 CW stations) in a total of 10 countries. Best DX report still 1232kms.
Labels:
500kHz
CQ-PA article on 500kHz
The Dutch magazine CQ-PA has quite a large article on 500kHz operation this month. I was very pleased to see my little IRF510 based transverter circuit and my small vertical antenna were shown. Amateurs in the Netherlands have recently been granted access to this band.
Nuclear Fusion breakthrough?
Some recent research may have helped the dream of unlimited and pollution-free energy from nuclear fusion become a big step closer. Scientists in the USA have demonstrated that containment of atoms for fusion using laser beams is far less problematic than first thought. Unlike current nuclear fission, nuclear fusion reactions create no radioactive waste materials. Potentially nuclear fusion reactors, if created on a commercial scale, could dramatically help supply clean energy the world so badly needs. See http://news.bbc.co.uk/1/hi/sci/tech/8485669.stm
Labels:
fission,
fusion,
nuclear,
radioactive,
waste
Super-efficient VHF antenna?
See http://www.nist.gov/public_affairs/techbeat/tb2010_0126.htm#antenna
"The National Institute of Standards and Technology (NIST) and partners from industry and academia have designed and tested experimental antennas that are highly efficient and yet a fraction of the size of standard antenna systems with comparable properties. .....NIST engineers are working with scientists from the University of Arizona (Tucson) and Boeing Research & Technology (Seattle, Wash.) to design antennas incorporating metamaterials—materials engineered with novel, often microscopic, structures to produce unusual properties. The new antennas radiate as much as 95 percent of an input radio signal and yet defy normal design parameters."
Labels:
active antenna,
metamaterials
28 Jan 2010
Mosquito single IRF510 transceiver
EA3GHS and EA3FXF have produced a single IRF510 FET based version of his Mosquito transceiver using a PC as the back end of a software defined radio (SDR). In essence, the FET is used as a regenerative or direct conversion receiver - I think the two are indestinguishable in a single stage RX - with audio coupled to the sound card via a mains transformer which steps up the impedance. The IRF510 is capable of up to about 7W in this application. Coupled with an SDR back-end and this is SOME simple transceiver, especially if the crystal is VXOed.
Web based HF receivers (SDRs)
Web software defined receivers (SDRs) are becoming quite common now. They allow you to eavesdrop on a number of different HF bands and tune around for stations as if you're located at the distant location. The best place to find a list of these receivers is at http://www.websdr.org/ . I have used the one in Twente, Holland to see if my QRP 80m signal got to The Netherlands (it did) and to check activity on bands like 500kHz. Sometimes these SDRs are located in places where the background noise levels are very low too.
Labels:
sdr
27 Jan 2010
Apple iPad tablet launched
Apple has finally revealed its new killer product - the iPad. My son has an iPhone and is very pleased with it. I doubt I will be persuaded to buy either. I have been tempted with the Apple iPod Touch which is a very desirable product.
26 Jan 2010
500kHz again tonight
After a break of a couple of days, I'm back on 500kHz WSPR again this evening with my 1mW ERP. The reports are still coming in from far and wide (G, GM, PA and LA so far), although no super-DX from central Europe yet this evening.
25 Jan 2010
Walford Kits "Fivehead" SSB transceiver
A friend of mine is building a Walford Kit "Fivehead" SSB transceiver. He has got the kit, but was surprised to find the parts placement was not silk screened on the PCB; I guess this is a cost saving measure.
Although there is a not-to-scale layout, a clear colour photo from above of the assembled board from the component side would help him a lot. He's asking Tim if he has one he could email, but does anyone already have one they could email me please?
Although there is a not-to-scale layout, a clear colour photo from above of the assembled board from the component side would help him a lot. He's asking Tim if he has one he could email, but does anyone already have one they could email me please?
XBM80-2: a 2-way QSO and report
This morning I worked M0DRK using my tiny 60mW XBM80-2 transceiver I designed last week. It uses just 13 parts plus the crystal, earpiece and optional frequency offset switch. My report for Derek was 599 and he gave me 599+40dB. Derek is in the same village. Also monitoring was G4LHI in Huntingdon 32kms away and he reported my signal was as strong as Derek who was running 5W. In fact 60mW is only going to be about 3 S points down on 5W. I also heard GM3JUD when listening on the XBM80-2 on 3.560, but was unable to raise him.
Subscribe to:
Posts (Atom)