7 Dec 2009

500kHz full transceive transverter with 5 extra parts only ..and no relays!



I've now modified my WSPR tx up-converter to a full TX/RX tranverter suitable for WSPR, QRSS and CW  in a very simple way, making use of the FT817 split facility which allows you to RX on 500kHz and TX on 28MHz. By adding a series LC between the TX PA and the FT817 input/output RF connection (with back-to-back diodes at the L and C junction, this allows "pass through" from the 500kHz ATU to the FT817 on RX (tuned to 500kHz). On TX, the diodes conduct and the C part is in parallel with the first cap in the TX low pass filter. This scheme is now working really well with good RX sensitivity and no change in TX power out.

No comments: