Issue with Windows 10? - NOT amateur radio

Since doing the latest Windows update, I get the impression that the PC closes down after a certain time. A new sign-in is needed. If correct, does anyone know how to stop this please?  

As you may know, I put the rig beaconing on WSPR or FT8 and monitor on a different PC in the lounge, popping into the shack if anything needs adjusting. To get into the shack takes a few seconds only. 

Is there a default setting that can be turned off?

10m FT8 (Monday)

In the last 30 minutes 33 stations have spotted my QRP from the QMX+ on 10m FT8 QRP TX.

UPDATE 2130z:   303 spots of my QRP 10m FT8 today in 5 continents. See map. Lots of stations were also spotted here on RX. The QMX+ works well on 10m FT8. 

QMX+ more testing

This morning I was puzzled why I was getting no output on 20m FT8 with the QMX+. Disabling the SWR protection solved the mystery as the SWR exceeded 3:1 and this was preventing TX.  I turned the protection back on as 20m is a band I rarely use.

On 6m FT8, I had 4 spots of my QRP from the QMX+.  I am still getting insufficient audio on 6m FT8 RX. This still requires further investigation.

NFD 1950s style

 

This photo was on social media recently.

Flowers in our garden - NOT amateur radio

 

These are in our garden right now.

Sunspots - Monday June 17th

 Solar flux is 167 and the SSN 152. A=13 and K=2.

QMX+ on 6m FT8 (Sunday)

As an experiment I quickly tried the QMX+ on 6m FT8. Power was about 3W and several UK spots were obtained with the V2000 vertical omni. For some reason the RX level on 6m appears too low. Further investigation is needed.

So far, I have tried it on 15m, 10m and 6m.  I wonder if it would work on 8m?  Maybe I should try it on 160m FT8 with the earth-electrode "antenna" in the ground assuming the match is good.

QMX+ on 15m (Sunday)

Just for fun, I tried the QMX+  on 15m. It was not for long. Several Es spots of me.  Looking at the bars on the TX monitor I would reckon about 3W power.

Birds - NOT amateur radio

Recently I erected 2 small bird tables with the aim of attracting more smaller birds and fewer large ones. This seems to have failed as the jackdaws have found a way! Robins seem to be very attracted to the dried mealworms. 

It’s too soon to tell if swift numbers are down here, but we have not sat out in the garden much this year.

More QMX+ testing on 10m FT8 (Sunday)

After lunch I want to try my QMX+ on 10m FT8 TX. I was quite surprised that I cannot turn the power down. If you can, I have not found how!  Perhaps it’ll come in a later firmware. 

One good idea would be to automatically reduce power when beaconing WSPR to avoid stress on the PA when the PA can be on continuously for almost 2 minutes.

UPDATE 1540z: Success!  My first transmission with the QMX+ (10m FT8)  resulted in 18 spots across Europe. This was using CAT control. I have a lot more to learn, but this is a good start.

UPDATE 1651z:  3 QSOs in quick succession! All called me on FT8. In all, spotted by 49 stations.

UPDATE 1754z:  The map shows the stations spotted on 10m FT8 RX using the QMX+.