Solar flux is 70 and the SSN 0. A=4 and K=1.
5 May 2021
4 May 2021
Where are they? - NOT amateur radio
I saw one swallow in early April and none since. I have not seen a single house martin or swift.
At one time these were common, but not any more. This may in part be the wind direction, but I suspect global warming: their food supplies on their long journey north may have reduced as deserts grow.
To me, seeing screaming swifts overhead is an English spring and summer. Perhaps for not much longer?
Fresh green - NOT amateur radio
FT8 on the IC-705
I have the USB drivers and audio CODECs set up now on the rig, but have not got FT8 working yet.
Years ago this would have been a trivial task, but with my "brain fog" this is like doing it blindfold: tasks that would have been easy in 2012 are now really hard, taxing and exhausting. I also thought a USB-C was the same as a micro-USB!! It isn't! Luckily I had one around.
I think for FT8 on the IC-705 I shall need a lead with isolation as the PC introduces noise I think.
More on the 10FT8R RX
This afternoon, using the very slightly revised circuit (thanks for the circuit simulation Jay) I have been receiving yet more Es signals on the 10FT8R receiver with the tiny indoor loop. 22 stations just copied in southern Europe.
UPDATE 1604z: 67 stations spotted this afternoon.
Revised 10FT8R circuit - rev c
Attached is a revised circuit. Just 1 part has changed value (470n on the input to the first audio stage). For clarification, the caps feeding the PC mic input are 100n. Just for clarity I have made it clear this is my design G3XBM R.Lapthorn following the comment below by John Desmond EI7GL.
A proper CAD schematic will follow shortly.
Homebase10 dual band
10m FT8 RX (Tuesday)
At 0640z I turned on my 10m FT8 RX with the 10FT8R and tiny indoor loop antenna. No spots yet.
3 May 2021
New website ready soon (this week?)
As mentioned yesterday, I am working on a new Googles Sites website. All being well, it will "go live" later this week. You will still point to www.g3xbm.co.uk and it will automatically take you to the new pages when they are ready. Most pages have been done, but some remain to be done.
The main difference is pages will be accessed via drop-down menus at the top of the home page rather than the index on the left. It allows some new features including embedding, so my 10m FT8 grabber will be there too. I may be able to use this feature for other things as well.
All being well, there will be some new pages too.