The first USA station to copy my 500mW 10m WSPR beacon today was WG2Z (5600km) at 1312z. Most of the morning 4X1RF (3519km) has been copying me.
UPDATE 1924z: CX2ABP/D (11080km) has been copying me several times this afternoon. The last USA station to spot my 500mW WSPR beacon was K1OF (5500km) at 1718z. This indeed proved to be the last spot of me from the USA.
25 Jan 2015
Sunspots and 10m - Sun Jan 25th 2015
Sunspot number today is 57 and 10m propagation expected to be "fair". I definitely think solar activity is starting to fall away (on average).
24 Jan 2015
Micro 40 - 40m DSB transceiver
See http://home.alphalink.com.au/~parkerp/projects/projmicro40.htm .
Also: https://aa7ee.wordpress.com/2013/10/19/the-vk3ye-micro-40-dsb-transceiver/ .
Well designed DSB transceivers are much simpler than SSB rigs as no SSB filters and mixing to final frequency is needed. They must not be over-driven to avoid a spreading signal. The PA needs to be linear too. These issues being carefully considered, you end up with a rig that has the same bandwidth as an AM rig but with a suppressed carrier. DSB transmitters are usually received as an SSB signal. The downside is that if a simple direct-conversion receiver is used then there is no rejection of stations sitting on the other sideband. So, they are best on quieter bands, rather than busy HF bands. Bands like 10m, 6m and 4m are probably good candidates.
Although not impossible, it is quite difficult to demodulate a DSB signal on a simple direct-conversion receiver. DSB rigs are ideal as simple transceivers to communicate with SSB rigs.
Also: https://aa7ee.wordpress.com/2013/10/19/the-vk3ye-micro-40-dsb-transceiver/ .
Well designed DSB transceivers are much simpler than SSB rigs as no SSB filters and mixing to final frequency is needed. They must not be over-driven to avoid a spreading signal. The PA needs to be linear too. These issues being carefully considered, you end up with a rig that has the same bandwidth as an AM rig but with a suppressed carrier. DSB transmitters are usually received as an SSB signal. The downside is that if a simple direct-conversion receiver is used then there is no rejection of stations sitting on the other sideband. So, they are best on quieter bands, rather than busy HF bands. Bands like 10m, 6m and 4m are probably good candidates.
Although not impossible, it is quite difficult to demodulate a DSB signal on a simple direct-conversion receiver. DSB rigs are ideal as simple transceivers to communicate with SSB rigs.
10m USA WSPR spots of my 500mW beacon today
WG2Z (5600km) was the first USA station to spot my 500mW 10m WSPR beacon today at 1302z. I see that FR1GZ (9724km) on Reunion Is, South Indian Ocean, has already spotted me a couple of times already on 10m WSPR today!
UPDATE 1728z: KU4QI (6406km) was the last to spot my 500mW 10m WSPR-AXE-CW WSPR beacon at 1708z. There is still a chance others will spot me later.
UPDATE 2110z: The last USA station to spot me was K9AN (6505km) over an hour later at 1838z. It all depends who stays around and who is active! I was surprised.
UPDATE 2140z: I went QRT on 10m WSPR at 2112z. I have now QSYed to MF for the night.
UPDATE 1728z: KU4QI (6406km) was the last to spot my 500mW 10m WSPR-AXE-CW WSPR beacon at 1708z. There is still a chance others will spot me later.
UPDATE 2110z: The last USA station to spot me was K9AN (6505km) over an hour later at 1838z. It all depends who stays around and who is active! I was surprised.
UPDATE 2140z: I went QRT on 10m WSPR at 2112z. I have now QSYed to MF for the night.
G8HUH - multiple spots of my 5mW ERP on 472kHz WSPR
G8HUH (250km) in IO81 square has spotted me on 472kHz WSPR 16 times so far today since the middle of the night.
Sunspots
Sunspot number is up to 70 today and 10m propagation forecast to be "fair".
UPDATE 1346z: So far, the 10m band is behaving predictably.
UPDATE 1346z: So far, the 10m band is behaving predictably.
23 Jan 2015
70cms AM
As you may recall, I am quite a fan of super-regen receivers. Nothing as simple is able to match their AM sensitivity, but they tend to have poor selectivity.
With the availability of very low cost 433MHz modules (TX and super-regen RX) designed for AM data, these modules could be ripe for conversion to ultra-simple 70cm AM voice transceivers. One local friend, Andrew G6ALB, is currently carrying out experiments to see if this is feasible. I hope to work him on 70cm AM using such a rig in the months ahead. Sadly, I am still too clumsy to do any building work - very frustrating.
I am wondering if anyone else has tried these modules in such a circuit? With a simple MMIC PA (50 ohms in and out) the power output could be lifted to around 25mW carrier or more. With V2000 verticals this should be good for local ranges. Even at the low milliwatt level from these QRPp modules several km range should be possible with co-linear antennas.
UPDATE 2310z: I wonder what sort of power the TX modules typically produce with linear (speech) modulation rather than 5V square wave data modulation? Presumably much less than their rated power, so an add-on PA may be essential?
With the availability of very low cost 433MHz modules (TX and super-regen RX) designed for AM data, these modules could be ripe for conversion to ultra-simple 70cm AM voice transceivers. One local friend, Andrew G6ALB, is currently carrying out experiments to see if this is feasible. I hope to work him on 70cm AM using such a rig in the months ahead. Sadly, I am still too clumsy to do any building work - very frustrating.
I am wondering if anyone else has tried these modules in such a circuit? With a simple MMIC PA (50 ohms in and out) the power output could be lifted to around 25mW carrier or more. With V2000 verticals this should be good for local ranges. Even at the low milliwatt level from these QRPp modules several km range should be possible with co-linear antennas.
UPDATE 2310z: I wonder what sort of power the TX modules typically produce with linear (speech) modulation rather than 5V square wave data modulation? Presumably much less than their rated power, so an add-on PA may be essential?
South Indian Ocean on 10m WSPR
Best DX today on 10m, despite the "poor" forecast was FR1GZ (9724km) on Reunion Is who has spotted my 500mW 10m WSPR beacon 17 times this afternoon so far. Quite a few times recently I have had very good reports on 10m from distant stations when the forecast has been "sub-optimum". It goes to prove that 10m and 6m are fickle bands: don't take propagation expectations as gospel.
10m USA WSPR spots today
KF4GKY (6406km) was the first USA station to spot my 500mW 10m WSPR beacon today at 1322z. After the dire forecasts this morning I was wondering if 10m would open to the USA at all. So far (it is now 1350z) KF4GKY is the only USA station spotting me.
UPDATE 1815z: W3GXT (5840km) was the last to spot me from the USA today at 1702z. As this was over an hour ago it was probably the last today.
UPDATE 1815z: W3GXT (5840km) was the last to spot me from the USA today at 1702z. As this was over an hour ago it was probably the last today.
4X1RF now spotting my 500mW 10m WSPR beacon
At last, I am now being spotted on 10m outside the local area. 4X1RF (3519km) has spotted me a couple of times starting at 1056z this morning. Reports are weaker than usual.
Maybe I shall be spotted in the USA on 10m WSPR after lunch after all?4
UPDATE 1124z: So far, just a couple of weak spots by 4X1RF. Conditions on 10m do seem down on the last few months.
UPDATE 1210z: Better reports now from 4X1RF (-13dB S/N). Looks like 10m is coming to life.
Maybe I shall be spotted in the USA on 10m WSPR after lunch after all?4
UPDATE 1124z: So far, just a couple of weak spots by 4X1RF. Conditions on 10m do seem down on the last few months.
UPDATE 1210z: Better reports now from 4X1RF (-13dB S/N). Looks like 10m is coming to life.
Subscribe to:
Posts (Atom)
