The KD1JV Survivor 75/80m SSB transceiver

http://www.qrpkits.com/images/survivor04a.jpg

A recent visit to Hendricks Kits shows they now sell a new (to me at least) 10W pep 80m SSB transceiver called the KD1JV Survivor inspired by the Epiphyte 80m design of a quarter of a century ago. Parts for the latter became increasingly difficult to find and this new radio uses modern parts and increases the power out. A very small, 10W pep, SSB rig for 80m is an attractive idea and is sure to be popular, especially for holiday and field use. In its basic form it is around $100 and a little more if the digital display option is added.

The specs are:

• ~10W pep @ 13.8V
• 0.2uV receiver sensitivity
• 5 pole crystal ladder filter for selectivity
• 325 or 175 kHz tuning range, selectable at build
• Coarse and Fine tuning controls
• 8 ohm - 500 mW speaker output
• SSB, CW, and, "TUNE" mode
• 50mA Rx current (with optional Digital Dial)
• Inexpensive electret microphone input
• All through hole construction
• Professional silk screened and solder masked pcb
• Full aluminum chassis w/bail, cutout for optional digital dial
• Small size, 6" x 4" x 1.5"
• Assembled weight, w/dd: 330g./11.6 oz.
• 13.8 @ 2A, min. recommended power supply

Waters and Stanton respond on the FT817ND price increase

Today I received an email from Mark Francis, the sales director at Waters & Stanton PLC regarding the price of the FT817ND. You may recall I was suspicious that the price had risen when the Yen was weakening.

Mark explained that they are working to the tightest of margins these days and the price is basically set by Yaesu. He also pointed out that compared with 25 years ago we are getting a lot more for our money reminding me that back then the same money would have bought just a 2m FT290, whereas now we get a multi-band HF/VHF/UHF, multi-mode transceiver.

So, I stand corrected and accept what Mark has said.

I'm still looking around for the best deal on a new FT817ND to compliment my 12 year old FT817 that has been used just about every day since I bought it, but may well buy from W&S if they can match the best UK price.

Windows PC bargain

After some deliberation because of adverse reviews I ordered an Asus X101ch netbook from Amazon last week. When it arrived I added a 4GB class 10 SD card running Readyboost, deleted the junk software that was not needed, added MS Essentials virus protection and got going.

Well, for under £170 new I am blown away! This little machine is great: I have already used it for WSPR and had my first JT9-1 QSO with it on 20m just a few minutes ago. Spectran seems to work too. For web browsing it is just fine. The screen resolution and clarity are good. I have not had it slow down once and it has, touch wood, not crashed yet.

In fact my view is this is an excellent little 10.1 inch Win7 netbook for the things I need. Although intended as a second PC for /P use (optical beaconing and VLF in the field) it is currently being used as my main PC and working beautifully.

The windows experience index by the way is 3.2, which I think is average.

ATV today

Amateur TV seems to be in decline these days with fewer and fewer interested. A well known ATV local G3KKD reports activity well down in recent times.

In a move aimed at reversing the trend G8YTZ has announced some Amateur Digital TV TX and RX modules. However, when visiting Justin's site I was flabergasted by the prices: over £700 for the transmitter and  over £300 for the receiver! To attract newcomers surely some simple low cost modules retailing below £100 are needed.

Another version of my 472kHz transverter (G8AGN)

Emeritus Prof Barry Chambers G8AGN from Sheffield (more usually a microwaves and nanowaves operator) has just sent me a couple of photos of his version of my 472kHz transverter that he's just finished. Unlike me, Barry sensibly put it in a decent sized aluminium box which will help reduce heat affecting the LO frequency stability. 

G8AGN's version of the 472kHz transverter

I've lost count how many of these transverters, or variants thereof, have now been built but there must be a good few in use around the world now. I have still to box up the 137kHz version which was used a few months ago to span 250km with just the earth-electrode antenna.

Japanese Yen and radio gear prices

Today alone the pound-yen exchange rate has improved by over 4% in favour of the pound: basically Japanese goods are 4% cheaper than yesterday. UK dealers, please note: your customers are expecting product prices for Japanese radios to FALL please in the coming days and not rise!

The yen-pound exchange rate is now around 23% better (for purchasers of Japanese equipment) than a year ago, so some VERY good deals should be expected on Yaesu, Icom and Kenwood products.

A couple of 20m JT9 QSOs in the log already

QSO with UA4PPQ on 20m JT9-1 today

Well that was pretty easy: I loaded the latest software, listened a bit, then called CQ in JT9-1 and managed a couple of QSOs within 15 minutes (it takes about 6 minutes per QSO). Reports also received from the USA, Canada and Siberia, so everything working well.

The mode certainly seems to be very useful on HF and takes up very little bandwidth - the scale on the screenshot above is in Hz above 14.078MHz, which is the USB dial frequency.

Using 2.5W to the end fed Par 10/20/40 antenna, but reports suggest much lower power would be fine too. Now QSYed to 28.078 MHz USB dial JT9-1 and calling CQ.

JT9 mode on HF

Julian G4ILO has been having some good success on HF with JT9 mode, so I am encouraged to have a go too. This afternoon I'll be firing up on HF, probably 20m.

Results with this mode on MF were very encouraging giving me my first international 2-way QSO (as opposed to WSPR report) some months back. The slower JT9 modes are similar to WSPR in terms of weak signal performance, but allow basic real 2-way QSOs similar to JT65 mode QSOs.

PSK reporter now shows JT9 spots, so it is possible to see where your signal is reaching even if a QSO does not result from a CQ call.  The new JT9 Yahoo group is rapidly gaining members and is worth joining if interested in this new mode.

Recommended JT9 mode frequencies are:

10m  28.078MHz
15m 21.078
17m  18.104
20m 14.078
30m 10.130
40m 7.078
60m 5.2872
80m 3.578
160m 1.838

JT9 software can be downloaded from http://physics.princeton.edu/pulsar/K1JT/ As updates are still occurring it is best to check the site for later versions regularly.  The user guide for all WSJT modes is worth reading.

Good communications , or a lack of it in the NHS

My ham radio friend Julian Moss G4ILO has a brain tumour which he has been successfully battling for over a year now. Recently he had a hospital appointment to review treatment but reading his blog I see yet again he has, like many I know, been given the "run around" by the totally inept NHS service here in the UK.

This organisation needs radical surgery to get itself operating efficiently. Time and again it wastes money by messing up appointments, not having people where they should be, not having the data communicated between staff etc. It MADDENS me that sick people should be additionally stressed as a result of idiots who cannot run a business properly. They would save BILLIONS if patient records were shared electronically between health care staff (consultants, doctors, nurses, car service personnel and ambulance crews). It is not rocket science.

I have no fundamental issue with caring people trying to do their best, but they are totally hindered by the lack of decent communications at all levels.

In the 21st century, any organisation as bad as the National Health Service today would be in administration by now and its bosses sacked.  NHS sort yourselves out!

Tripods for optical comms

The one I missed on eBay

This evening I was annoyed with myself for not bidding for a tripod on eBay in time that went for just £6.50 in the end.  It had a nice solid structure and a 360 degree marked calibration on the horizontal pan adjustment and would have been ideal for my non line-of-sight optical comms over the horizon, where the ability to return accurately to a know bearing is important when hunting for weak signals.

So, can readers make any recommendations for something similar?
My requirements are:

1. Solid construction so it won't wobble around in wind with the optics and detector mounted on top.
2. Some way of calibrating the direction to within a degree or so horizontally so that known directions can be confidently returned to. Ideally a large 360 degree marked scale.
3. A way for leveling the head assembly so it can be aimed just above the horizon.
4. Low cost as I am looking for an inexpensive solution (don't want the tripod and mount to cost much more than the rest of the kit, which is about £5-10 total!)

Not being a great photographer, I know little about tripods and heads. Looking on eBay I didn't find anything close to the one I missed. It was SO annoying as I only missed it by 5 minutes having been out treating a fence in the (rare) sunshine today.