SPRAT 150 is out

The latest edition of the GQRP club's SPRAT quarterly magazine arrived on my doorstep today. As always, this is filled with a variety of interesting articles and this edition even includes one I wrote about 481THz optical comms "over the horizon", but don't let that put you off, HI.

GQRP club membership, with SPRAT 4 times a year, remains the best bargain in amateur radio in my opinion. More details on the GQRP club at www.gqrp.com .

I note that GQRP club sales is now selling fundamental crystals for 28.060MHz (suitable for my Chirpy rig) at just £2 each. This is a useful source of QRP related parts for club members.

Join!

Amateur radio postage stamps

The excellent Southgate Amateur Radio News page today mentioned that Luxemburg is bringing out a postage stamp to commemorate the 75th anniversary of the Luxemburg radio society. See http://www.southgatearc.org/news/march2012/amateur_radio_stamp_for_luxembourg.htm .  This got me wondering how many other countries have issued stamps with an amateur radio theme? I recall the USA doing a ham radio stamp in the mid-1960s.

Wondering if there were others I did a search on Google images for amateur radio postage stamps. Interesting.

VLF E-field probes compared?

Both the PA0RDT and DK7FC E-field probes antennas are suitable for detecting weak VLF amateur signals around 8-9kHz when used with the right PC software. See https://sites.google.com/site/sub9khz/antennas for the schematics of these and others.

What I'm wondering is has anyone done a "like-for-like" test to compare their performance? With a near identical test set-up (same height above ground, same ground and PSU noise conditions) it should be possible to compare noise floor, sensitivity (S/N of Alpha beacons, VLF MSK signals), and by looking for the intensity of the intermod line at 9kHz from broadcast signals in Europe get an indication of dynamic range. Has anyone done this test at VLF? If not, it looks like I shall have to do it and "suck it and see".

Incidentally, the PA0RDT voltage probe antenna makes an ideal antenna for shortwave, medium wave and long wave DX SWLs. It is essentially a high dynamic range wideband receive antenna which is tiny, yet capable of excellent results if mounted in the clear in a low noise environment ideally away from house electrical interference.

More optical tests looking for elusive GB3CAM

This evening, thinking it would be a good opportunity to look for the GB3CAM optical beacon (yet again) I took the trip to nearby Nine Mile Hill (32km from the beacon) with the kit recently used to detect G4HJW's Phatlight beacon over the horizon at 8.6km. My RX is now pretty sensitive. However, I failed yet again to detect anything of GB3CAM. Actually it was a little hazier than my first tests (when I had sensitivity issues) but I was disappointed not to detect a thing. All I managed was a chat with the farmer in whose field gate I'd set up my optical kit and PC: he seemed happy with my explanation.

I've asked the beacon keeper if the beacon was actually on-air - it could have been off I guess. 

My other question of Bernie G4HJW, the beacon keeper, is what the ERP of the GB3CAM beacon is compared with his phlatlight beacon at home that I'm consistently able to copy at 20-30dB S/N in 0.17 - 0.67Hz bandwidths non line-of-sight, whereas I've so far been unsuccessful receiving the Wyton optical beacon line-of-sight. At 32km haze will matter more and it may just be that on the occasions I've tried I've either had insensitive kit or poor optical conditions. I did try very carefully scanning the horizon this evening after sundown for a good 15 minutes without detecting a thing and I had a very good idea where to aim.

160m WSPR this evening

If JT65 is hard going on 160m this definitely cannot be said about WSPR: having switched on just a few minutes ago I am seeing and have been seen by plenty of stations in northern Europe with my 5W to the tiny loft vertical.

MSF 60kHz off air until April 6th

If you use the 60kHz LF signal from MSF Anthorn to lock your frequency reference or digital watch you may have a problem for a couple of weeks: it is off the air!  It is scheduled to be off air until 20:00 UTC on April 6th. See http://www.npl.co.uk/science-technology/time-frequency/time/products-and-services/msf-outages.

PA1B's QRPp website

Bert PA1B has an excellent website describing his experiments with very low power on HF. Using his FT817 with various simple attenuators he has been able to work some remarkable DX with powers ranging from 1mW to 500mW. His website explains how he has achieved this. It is an inspiring page showing just what is possible.

QRP JT65 to HB9 on 160m with indoor antenna

Just seen that HB9FX has copied my 160m QRP JT65 signal at -24dB S/N. Still finding it hard to make 2-way QSOs with this mode on 160m, but it proves the tiny indoor loft vertical antenna is radiating OK. Best DX report on JT65 is still the SP station about 10 days ago at over 1000km.

10m DX

This evening there were some interesting west African stations coming through on 10m.  6V7Z in Senegal on SSB and J52HF in Guinea Bissau on CW. I did not try to break pile-ups with my QRP and instead worked CT9/DL3KWR on QRP CW. Following this I moved down to 12m and worked N1WPU on CW also with QRP.

First ever 2-way international ham QSO on VLF

From Marcus DF6NM via the RSGB LF reflector earlier today:

"Today between 7:30 and 14:00, Lubos OK2BVG and I successfully completed a two-way contact on 8.97 kHz. We believe that this is the first international QSO ever on VLF.

The distance between Breclav (JN88KS) and Nuernberg (JN59NJ 69es) is approximately 424 km. The weekend before, Lubos and I had found that we could see each other's VLF transmissions from our small home antennas in a slow spectrogram, using about 0.45 millihertz FFT resolution ("DFCW-6000"). This long integration requires about 2000 seconds of continuous non-interrupted carrier to reach full sensitivity.

We decided to use absolute frequency encoding of characters ("MFSK-37" mode), which has a simple structure but is significantly more efficient than two-frequency DFCW. The software signal generators in SpecLab were used to create 30 minute dashes by editing the frequency in 1 mHz steps every half hour. This can be automated by opening a textfile which is read by the "periodic actions" function. Between transmissions, additional half-hour gaps were inserted to let the FFT ring down, and allow for TX-RX reconnections.

Characters are identified by reading the frequencies above 8970.000 Hz, with 8970.000 to .009 assigned to the numbers, .010 idle or space, and .011 to .036 the letters A-Z. Lubos used a Rubidium standard to lock his transmit samplerate, while both receivers and my TX were synchronized by military MSK signals from GQD (22.1 kHz) and DHO (23.4 kHz).

With about 80 watts from an audio amplifier, I could get up to 0.38 A antenna current into my top-loaded vertical 9 m above the roof, radiating on the order of 10 to 15 microwatts. I believe that Lubos is using similar equipment, perhaps a couple of dB stronger. For receive, my soundcard was connected straight to the loading coil and antenna, whereas Lubos has an active probe at a quiet site remote from his TX location.

We wanted to go for a "full QSO" format with reports and confirmations, beyond the rudimentary three-dash "micro-QSO" format which was used in June 2009 between DJ2LF and myself. With single-letter suffixes, we ended up proceeding as follows:

07:30-08:30 "NB" ;Lubos' call: df6Nm de ok2Bvg
09:00-10:30 "BNM" ;my reply and report: Bvg Nm M
11:00-12:00 "RO" ;his confirmation and report
12:30-14:00 "RTU" ;my confirmation and thank you

Although today the noise was not as low as it had been before, we managed to exchange the essential information in 5.5 hours until 13 UT, after which QRN from lightning in southeast Europe became strong enough to obliterate further copy.

Attached image contains captures from Lubos' grabber at Apollons temple (top) and my receiver (bottom), with screenshots from the DK7FC and OE3GHB grabbers pasted inbetween. The original captures are at http://df6nm.bplaced.net/VLF/ok2bvg_df6nm_120325/. All spectrograms were stretched to the same timescale (5 min/pixel). On the left hand side, you can see a MFSK pre-test from Lubos, sending his call to hs own grabber at very low power. There was also a long dash from OE3GHB on 8970.030, and a carrier from DJ8WX on 8970.022 is visible at DK7FC.

The rightmost part of the captures shows the essential eight dashes from our QSO. You can see that I had almost lost Lubos' "B" when my noise blanker triggered heavily on local QRM, inducing me to give an "M" rather than "O" report. But hovering the cursor to 8:15 UT does show the peak at 8970.012 Hz in the spectrum graph. My final "R" is just barely visible at .028, whereas the following "TU" at .030 and .031 ended up drowning in the increasing noise.

During the lowest noise period (9 - 12 UT), the dashes were visible (though not decodable) in 4.5 mHz "600" spectrograms. At that time, our symbols also appeared on Paul Nicholson's spectrogram http://abelian.org/vlf/fbins.shtml#p=1332712800&b=110&s=sp

Thanks again to Lubos for the effort and patience! Although exchanging half-hour symbols is tedious and may sound boring to some, both of us enjoyed it and actually found it quite exciting.

Best 73,
Markus (DF6NM)"