|
8.76kHz QRSS3 signal at 3.8km |
Recently the water company repaired some pipes right outside our property in the road. I was informed the pipes are/were NOT metallic.
Today, just as a check, I tried 8.760kHz earth-mode running my usual 5W into 20m spaced earth electrodes just to see if the repair work made any difference to signal levels some kilometres away.
At my favourite roadside test site 3.8km from home I set up my RX and tried 2 different loops on the ground (a) my 30t 80cm square loop and (b) a large single turn loop. Using QRSS3 the signal was copied on both antennas at the usual strength. This makes me think any "utilities assistance" is NOT purely from metal water pipes in the road.
My next planned test is to see how well an earth-mode signal propagates along one of the many fenland water channels using one TX electrode actually in the water and one on dry land. For RX I'll either use another earth electrode pair (one in and one out of the water) or a loop or E-field probe. The next couple of weeks are pretty busy with family matters, so this fenland river test may not take place until sometime in August.