6 countries on 500kHz tonight

Another good night on 500kHz WSPR with several more reports from Finland (OH1LSQ) as well as a report from Norway (LA3EQ) and several from nearer countries. ERP still in the 1-2mW region from the loop antenna.

Protecting power grids from solar storms

NASA Science News reports:

"Every hundred years or so, a solar storm comes along so potent it fills the skies of Earth with blood-red auroras, makes compass needles point in the wrong direction, and sends electric currents coursing through the planet's topsoil. The most famous such storm, the Carrington Event of 1859, actually shocked telegraph operators and set some of their offices on fire. A 2008 report by the National Academy of Sciences warns that if such a storm occurred today, we could experience widespread power blackouts with permanent damage to many key transformers."

There are plans afoot to create an early warning system to protect the US grid system in such events.

More DX reports on 500kHz

Log from early evening Oct 26th 2010 (500kHz QRPp WSPR)

This evening, the QRP 500kHz signal from the small vertical wire loop is doing well with reports again from Finland on WSPR. I still can't quite believe how a loop of thin wire with part of it sitting in the wet grass can work so well with so little power applied to it.

Stable, simple, stand-alone, 8.970kHz source?

What do people think is the simplest way of generating a stable 8.970kHz (kilohertz) frequency that does not require a PC when running? I thought of an HF crystal divided down by 256, but have you tried to buy a "made to order" crystal lately? I need this for my VLF tests this coming winter.

Vertical loop versus earth electrodes antenna

Just done an interesting test comparing my vertical wire loop with an earth electrode antenna. I removed the lower part of the loop and connected the ends to ground. Matching was totally different (low Q antenna) but the performance was only 5dB down on the loop, based on reports from 2 local and one DX station. A similar test on 136kHz as the only station on in range (M0BMU 69km) was unable to copy my signal on the earth electrode antenna suggesting at least 5dB down on that band too.

Amateur VLF update: reception in 8 countries + 1310km DX!

DK7FC's summary of reports on Oct 23rd 2010

DK7FC has now summarised last weekend's test results on VLF (see table attached). His mW ERP signals from his kite antenna were received on 3 different VLF bands at distances up to an incredible 1310kms!
Stefan has certainly shown how to do it.

136kHz ERP

A fairly easy way to increase my ERP on 137.5kHz WSPR is to up the supply voltage to the IRF510 PA. Using a 20-24V supply I was able to get another 3-4dB ERP judging by the reports from M0BMU and G3WCD this morning. This evening I'll give it a go with the higher supply to see if I can get any reports from further afield. I've also thickened up the bottom part of the loop which will reduce the resistive losses by about 15%.

DK7FC's VLF tests a great success

Stefan's latest VLF kite antenna transmissions at 8.97kHz and even lower frequencies were a great success yesterday with reception as far as Eire, Italy, Poland and the UK. The attached shot shows the signal on 2 frequencies as received by Renato IK1QFK in Italy.

M0BMU receiving DK7FC's 8.97kHz signal 10dB S/N

Jim reports that Stefan's DK7FC's 8.97kHz test signal is visible at 10dB S/N in Tring UK this morning. He is also visible on other grabbers in Europe. This is an excellent report and further encouragement for those of us taking our first (QRP) steps on the 33km band.

More 500kHz 2mW ERP DX reports this evening

This evening I switched back to 500kHz from 137kHz WSPR earlier in the day. Yet again good WSPR reports from GM4SLV and OH1LSQ (1733km) who received me as early as 1716z.