28 Sept 2010
7th new reporter on 137.5kHz WSPR
M0BMU copied my 137.5kHz QRP WSPR signal today giving me -19/-20dB S/N, which is quite a good report. Distance is 69kms. This is now the 7th unique station reporting my WSPR beacon. I'm still hoping for a report from outside of the UK soon, but suspect I'll have to increase the ERP beyond the current 20uW level to achieve this. The consistent signal report from Jim should allow me to calculate ERP based on field strength at a good distance. This will allow me to check the accuracy of my ERP measurements much nearer to home.
27 Sept 2010
Sub-9kHz Amateur Radio group: 100+ members already
Since creating this new group on Saturday it already has over 100 members. Now we need to see some postings from people actually doing activity down there in the "Dreamer's Band".
See http://tech.groups.yahoo.com/group/sub9khz/
See http://tech.groups.yahoo.com/group/sub9khz/
Labels:
sub-9khz
26 Sept 2010
A good evening on 500kHz
This evening I was well pleased with my simple 500kHz transverter and the vertical wire loop antenna in the garden producing around 2mW ERP. The map shows stations that reported me on WSPR including LA3EQ at 769km, which is the best DX so far on the loop. The loop doesn't seem to be that directional surprisingly.
137kHz QRP transverter (provisional schematic)
Attached is a first draft of the 137kHz QRP transverter schematic. The values are not all correct or optimised on the circuit. Also the RX preamp has still to be added, but this is what I'm proposing to do. The TX is working pretty well (best DX 148km) and produces around 5W from the PA which runs cool and 20uW ERP. An updated version will appear on my website later. It may even get put in a box soon!
Labels:
136khz,
qrp,
transverter,
wspr
500kHz ERP with the vertical loop antenna
Results on 500kHz WSPR with the vertical 80sq m area loop (made from 1mm diameter wire) are very good with signal reports from G3XIZ this evening of +4dB S/N. M0BMU has given me - 4dB S/N. This leads me to believe the ERP of the system is now somewhat higher than with the short Marconi vertical. Based on earlier calculations I think my ERP, in the best direction, must be about 2mW now, some 6dB more than it was.
25 Sept 2010
6th unique WSPR reporter on 137kHz
This autumn is beginning to look a bit like last year when I was taking my first tentative steps on 500kHz WSPR: each week would land me a few new reports from more distant stations. This autumn my challenge is 137kHz WSPR and so far I've been copied by 6 different stations: G6ALB, G3XIZ, G3XVL, G3WCD, G3YXM and, this evening, M0FMT. Best DX remains G3YXM at 148km. Not bad for a true QRP station with less than 5W from the PA and less than 20uW ERP with the transverter just a breadboard on the desk and the ATU sitting on the bedroom table.
Also today I copied G8IMR, Andy Talbot's QRP beacon from Southampton on 137.530kHz.
Also today I copied G8IMR, Andy Talbot's QRP beacon from Southampton on 137.530kHz.
Sub-9kHz Amateur Radio (Yahoo group) formed
This new group is for anyone interested in amateur radio communications below 9kHz in the so-called "Dreamer's Band". See http://tech.groups.yahoo.com/group/sub9khz/
VLF DX transmission with earth electrode transmission (49.6km)
DK7FC's 8.97kHz DFCW transmission received at 49.6km |
24 Sept 2010
Another source of LF/MF and HF interference
This was posted on the LF reflector: we'll have yet another source of LF/MF and HF interference in the years ahead as more people install such systems. Hugh's post got immediate replies from people who'd suffered bad interference from such systems. beware of photocell panels on neighbours' roofs!
"My neighbour informs me that she is intending to have photovoltaic panels installed on her roof, in a scheme where she gets free electricity (all subsidised by the government of course!)
My concern is the possibility of high levels of interference generated by the kW inverters needed to pump electricity back into the National Grid. I would guess that such invertors probably operate kHz and might be expected to interfere with LF and VLF reception. The wiring to all the panels on the roof might act as a
very good aerial!
It also occurs to me that any lack of RF immunity to my transmissions, in the new installation, might have dramatic consequences - I know from studying electrical engineering at college that connecting a generator to the grid with incorrect phase leads to a big bang!
Has anyone any experience of such installations? Perhaps someone has one nearby and could comment on any EMC effects.
Hugh M0WYE"
Labels:
interference,
noise
More sub-9kHz experiments
Just received this from Stefan DK7FC:
Dear LF/VLF,
Today i saw the first time a flag from Norway on my VLF Grabber (http://www.iup.uni-heidelberg.de/schaefer_vlf/DK7FC_VLF_Grabber.html). I would be very fascinated if my signal would be copied in LA/SM/OH (of course, in all countries it would be very fascinating :-) ). Are there any stations, reading the reflector, from there who have the ability to receive on 8.97 kHz (or even 6.47 kHz) with a sensitive and stable RX frequency in DFCW-600 mode?
This would be one of my wishes for this period! One. ;-)
For this weekend i planned the next VLF experiment with the 200m vertical on 8.97 kHz but the wind forecast is not too promising :-( Maybe things look better tomorrow. I have to inform the air traffic control to give out a NOTAM (http://en.wikipedia.org/wiki/NOTAM), 48 hours befor i can start...
I will announce tmw, if i will carry out the next test, if.
The signal would be once again the strongest i've ever radiated. About 50 mW ERP is the goal.
My planned tests for this year on VLF (kite antenna):
- CW QSO to DF8ZR (16 km distance) on 9 / 137 kHz
- Copying my signal on 8970/6470 Hz in Heidelberg in CW (40.0 km, audio recording and later analysis)
- Beeing visible in DFCW-120 in UK
- Beeing visible on the grabber of Renato Romero on 8970/6470 Hz
- Becoming QRV with the 300 m vertical antenna on 8970/5170 Hz, radiating 100 mW ERP at 8970 Hz
- Beeing visible in Russia and at all interested RX stations :-)
- Maybe a TA contact?
vy 73, Stefan/DK7FC *Dreaming...*
Subscribe to:
Posts (Atom)