With exactly the correct settings, my WSPR-X running on a Win 7 machine refused to upload spots to the WSPRnet.org database today. When I realised it was not working I did 2 things: (a) I closed the program and restarted it, and (b) reset the PC clock to internet time.
Since doing these things, my "lost" spots successfully uploaded to the database. I have no idea why WSPR-X seems to be so temperamental.Otherwise I like it, especially the realtime,scrolling waterfall and support for WSPR-15, although I have only tried this slower mode once, on LF. Stability needs to be pretty good (over a 15 minute period) for WSPR15.
Showing posts with label wsprx. Show all posts
Showing posts with label wsprx. Show all posts
11 Oct 2014
18 Jan 2013
Mixed results with WSPR-X and WSPR-15
The new version of WSPR works well with plenty of reports given and received on 472kHz with it over the last 12 hours using the 2 minute version (as before but now with a waterfall and better interface), but mixed results on the slower 15 minute slot WSPR-15 which can detect much weaker signals.
My problem is TX drift over a long 15 minute transmission. My small 10W transverter is in a tiny plastic box. When using a 2 minute transmission the PA barely gets warm so there is little heat transferred to the crystal oscillator. With the much longer TX burst the PA warms more and the crystal warms up several degrees, moving the oscillator frequency by some 10s of Hz. So, although I was able to copy signals in WSPR-15, I was not able to be detected by others overnight. There are also far fewer stations monitoring yet on WSPR-15.
The solution is to rebuild the transverter into a bigger (metal) box with (a) better heatsinking so the heat rise with a mismatch is lower, (b) a slightly more efficient PA - problem here is with weather changes the antenna match goes off optimum sometimes and the heat rises as it the PA becomes less class E, and (c) put the conversion frequency oscillator physically further away from the PA, currently it is less than 10cm.
If I fix these issues and am sure that I transmit a more stable signal in the narrower (25Hz wide) WSPR-15 slot then I have a better chance of succeeding with the more sensitive version. With another 7-9dB S/N detection improvement, my signal could reach some of the more distant stations like TF3HZ.
My problem is TX drift over a long 15 minute transmission. My small 10W transverter is in a tiny plastic box. When using a 2 minute transmission the PA barely gets warm so there is little heat transferred to the crystal oscillator. With the much longer TX burst the PA warms more and the crystal warms up several degrees, moving the oscillator frequency by some 10s of Hz. So, although I was able to copy signals in WSPR-15, I was not able to be detected by others overnight. There are also far fewer stations monitoring yet on WSPR-15.
The solution is to rebuild the transverter into a bigger (metal) box with (a) better heatsinking so the heat rise with a mismatch is lower, (b) a slightly more efficient PA - problem here is with weather changes the antenna match goes off optimum sometimes and the heat rises as it the PA becomes less class E, and (c) put the conversion frequency oscillator physically further away from the PA, currently it is less than 10cm.
If I fix these issues and am sure that I transmit a more stable signal in the narrower (25Hz wide) WSPR-15 slot then I have a better chance of succeeding with the more sensitive version. With another 7-9dB S/N detection improvement, my signal could reach some of the more distant stations like TF3HZ.
Subscribe to:
Posts (Atom)
