Earth-electrode antenna on 80m

This evening I have been using the 20m baseline earth-electrode antenna on 80m. From the shack (upstairs) there is a 20m coax down to the back of the garage where it picks up the earth electrode wires. On 160m the match is poor but on 80m a near perfect 1:1 match, so no radiation from the coax.

On receive there are plenty of signals visible and decoding on WSPR and on TX it seems to be getting out pretty well with 1W RF from the FT817.  I am not sure of the ERP on 80m, certainly higher than on 630m (472kHz), but it does appear to be quite effective.

Tomorrow evening I'll match the earth-electrode antenna with the Elecraft T1 auto-ATU and see how it performs on 160m. I'll put the ATU right at the earth-electrode end of the coax so that we'll see the radiation from the earth-electrodes and not the feeder.