"Continuation
of the Pixie price saga, the more you buy the cheaper they are, £1.94p each if
you buy 10
Its
just impossible to even think how they do it:
73
Steve
http://www.g1kqh.talktalk.net/"
http://www.g1kqh.talktalk.net/"
Simple QRP projects, 10m, 8m, 6m, 4m, FT8, 160m, WSPR, LF/MF, sub-9kHz, nanowaves and other random stuff, some not related to amateur radio.
My QMX+ has been on since about 1035z. So far, 5 English stations have spotted me. The QMX+ initialised after a few minutes! UPDATE 1145z:...
4 comments:
Hi Roger,
How about this 40m CW transceiver for less than 4 euro:
http://www.banggood.com/DIY-Radio-40M-CW-Shortwave-Transmitter-Kit-Receiver-7_023-7_026MHz-p-973111.html
73
Ron
I built up a cheap Pixie kit, and, yes, it sort of works but the poor Rx makes it very difficult for real QSOs. (The Tx in these kits puts out 2W at 12V, which is great).
Broadcast AM breakthrough, Humm, taming the LM386 (what a truly horrible IC this is!) spoil the rx.
The slighly more expensive Forty-9er Kit (6.82 pounds, ebay) at least has a half-decent mixer and AF, and (in my humble opinion) is much better.
An even better qrp tranciever kit was SW40+ (was 50 dollars). I use mine nearly daily! but unfortunately is no longer sold. Hugh G6AIG
What do you really want for a couple of quid, its just basic conversion..
Many have built the Pixie not just from kits but also the basic RV3GM Micro-80 scratch design that has been rehashed in many different variants..
73 Steve
A bit of fun and enjoyment in radio is making your own gear-however humble. One can buy stuff costing thousands and get on the air. If I can spend 2 or 3 quid, make my own stuff and get on air, that will do me. Good luck to the wealthy-I hope they earned it.
Regards
From
Mike
2e0yjy
Post a Comment