40m Pixie measurements

Pixie harmonic measurements

This afternoon I visited G6ALB to do some more accurate measurements of my completed 40m Pixie kit. Power out with the 12V battery was 400mW and with a fresh PP3 9V battery 200mW. On the 12V battery TX current is around 129mA and at 9V around 83mA. 2nd harmonic rejection was about 20dB. Even the 9V output is a useful level. Maybe the cased unit should include an internal 9V battery pack which is switched off when an external 12V pack is available?

Pixie on the bench

To be more useful, I should add a 7.030MHz crystal and have a switch to select this or the original 7.023MHz one. 7.030MHz is the QRP frequency. My experience is this can be quite busy.

I should also case the unit!  Drilling the case could be a challenge in my current state of health! Just doing the building and testing was exhausting.