Stations worked with less than 5W to a halo on 2m |
Simple QRP projects, 10m, 8m, 6m, 4m, FT8, 160m, WSPR, LF/MF, sub-9kHz, nanowaves and other random stuff, some not related to amateur radio.
3 Feb 2015
2m UKAC tonight
If I have my dates right, tonight is the February 2m leg of the RSGB's UK Activity Contest. My 3 el beam is still not rotatable - it is fixed aiming SW, so I may use this and my halo instead for about 1 hour. The feeder to the halo is only RG58 so the loss is much greater than when on the beam which has fairly low loss coax.
UPDATE 2135z: I stayed on 2m for 1 hour before I had to stop because of my poor voice. 5 stations were worked with best DX G3MEH (84km). I used just the halo antenna with the high cable loss. Best DX heard was in IN99 and JO33 squares. As I was running real QRP and a halo for an hour only, it was not a bad effort. I wonder if I should replace the halo and feeder with a better cable and better omni antenna such as a big wheel? Gain would be a little down on the small beam, but better than the halo. Many stations are worked in contests off the main beam. Only one station worked this evening was /P. Several more stations would have been workable such as G2XV and G4CLA.
No comments:
Post a Comment