ERP calculation on 472kHz

In an attempt to establish my ERP on 472kHz, I have crunched some numbers. I think it is error free, but no doubt someone will soon tell me!

With a 1:46 step up toroid, I am measuring the DC volts rectified across a 470 ohm secondary load resistor using a small 50uA meter in series with 240k ohms (120k twice) and a series silicon diode. This circuit is straight out of the "LF Today" book available from the RSGB bookshop.

DC current = 30uA
DC voltage across 470ohm secondary load  = 0.6 + (240 x 10E3 x 30 x 10E-6)  = 7.8V
DC voltage (rms) across 470 ohm = 7.8/1.414 = 5.52Vrms
I secondary = 5.52 * 10E3/470 = 11.7mA
I primary =  46 * Is = 46 * 11.7mA = 0.54A

Rrad = 160 * pi^2 * Heff^^2/lambda^^2 = 160 * 3.14 * 3.14 * 2 *2/(630 * 630) =0.0159 ohms

P(erp) = I^2 * R = 0.54* 0.54 * 0.0159 W = 4.6mW

My original guesstimate of 5mW ERP is not far out!

Clearly getting the antenna much higher would help enormously as ERP is proportional to Heff^^2. All one can really be sure of is the order of magnitude. I am running low milliwatts.