5 Feb 2012

A 472-479kHz band?

Latest reports from the WRC2012 conference suggest the possibility of a secondary amateur allocation between 472-479kHz look "promising" although this hinges on a crucial meeting on Tuesday Feb 7th. Some countries remain against an amateur allocation, but the majority do support one, with caveats. A 7kHz wide worldwide allocation would be a good outcome, so keep fingers crossed for a few more days.

4 Feb 2012

QRP and S Points

This very useful little diagram was posted on Wim PC4T's blog today showing how little effect going QRP usually has on operating effectiveness. Going from 100W to 500mW is just 4 S-points, so if your signal is strong you'd still be a decent signal. Of course, when conditions are marginal 100W may be helpful, but QRP is so much more fun.

Optical receiver noise floor measurements

A PC with some simple free software makes a very useful piece of test gear.

For example, today I wanted to check the noise floor of my optical receiver head between 0-20kHz in total darkness and in daylight and compare this with the noisefloor of the PC with the head turned off. SM6LKM's excellent little software receiver designed to listen to SAQ's transmissions on 17.2kHz was ideal. This tunes from 0-22kHz. Here are the results (see plots) which show noise goes up by about 5dB in the daylight, although noise at 0-2kHz seems to go down in sunlight. By connecting the optical receiver head to the PC I was able to use this little package to see the noise floor changes.  G4JNT thinks the FET is possibly being biassed to a less optimum position, or it is saturating, in daylight. By changing the bias I may be able to get a lower noisefloor and better sensitivity. That I shall try tomorrow.

481THz update: 1.6km test

Today I did my first test beyond the end of my street and in daylight.  I set up my 1.082kHz subcarrier CW beacon and 100mm optics pointing out through my double glazed bedroom window and aimed it at a local feature called the Devil's Dyke which is 1.6km (1mile) exactly from home. This is the furtherest line-of-sight (LOS) path I have from home.

Then I went up to the Devil's Dyke and started looking with my handheld 100mm optics receiver. Much to my joy and surprise I heard the beacon before I spotted it by eye. The beacon could be copied over a stretch about 50m along the path. S/N I'd guess at around 20dB (by ear) in speech bandwidth in daylight. Next time I'll take the laptop and measure S/N with Spectran.  1.6km is my best distance so far. I'm using a BPW34 detector with some reverse bias with the PIN diode's anode connected directly to the FET gate in a KA7OEI optical head. This feeds into a feedback biased common emitter stage into a crystal earpiece. Recovered audio was a bit low in the wind.

Some progress in the right direction.

2 Feb 2012

More Sixboxes and Fredboxes


Joe Milbourn has a nice photo of his version of my Sixbox QRP 6m AM transceiver. It looks he's made some changes including the addition of a beefier audio stage on receive, perhaps to drive a loudspeaker.  It also looks like he has added a mic pre-amp. Click the link for Joe's original size image. Incidentally, there are some great photos on Joe's picture site.

Then I noticed a version of my 2m AM Fredbox on a Romanian website. See http://www.garajuluimike.ro/electrice/emitator-receptor-144mhz.htm . This version also uses an LM386 audio amp to drive a loudspeaker.

Latest Solar Data

Jan Alvastad's excellent page on solar data shows that for the last couple of months the trend in solar activity is downwards, not upwards. Now it is not uncommon for solar cycles to show more than one peak, with the second being greater than the first, but I hope that was not "it" and that we are now sliding down to the next minimum already! The image below is on Jan's site and I hope he does not mind me linking it here.

More on the German "Chirpy"

Today I got this email from Martin about his build of Chirpy:
Hi Roger,
Somehow the text of my email got lost when I send it from my phone. I like your blog very much, especially your homebrew projects. Yesterday I took the time to get the chirpy from the breadboard into a nic enclosure. I have plenty of this tins since my xyl likes to eat some paste that comes in them. My rebuild of chirpy puts out 210 mW and has a lot of chirp. Perhaps we can have a chirpy qso when the band is open.
Thank you very much for the design and your nice blog.
73 de Martin, DL8MAR

Slight progress towards a new 500kHz band

The latest reports from WRC2012 about a possible new allocation just below 500kHz sound slightly more hopeful than a few days ago with China and Russia softening their positions, but unfortunately the Arab group seems dead set against an allocation at all.  We'll have to wait until Working Group 4C (next level up) discusses it.  In the meantime let's keep our fingers crossed.



1 Feb 2012

VLF Talk - Cambridge Club Feb 10th

On Feb 10th I have been invited to talk to the Cambridge and District Amateur Radio Club on VLF through the ground although I intend to widen the scope to include all aspects of amateur radio communications experiments below 9kHz. In the last year or so this aspect of our hobby has come on leaps and bounds and what was once thought of as impossible being achieved. Surprisingly, this is a very accessible part of the spectrum in which to experiment. If you want to come along and are not a CDARC member I am sure you'd be made welcome by club members.

Another 10m Chirpy

Martin Spreemann (callsign not known) in Berlin has sent me a picture of his version of Chirpy, the minimal component transceiver for 28MHz CW. I wonder what results people who have made this (rather chirpy) transceiver have obtained? Please let me know if you have built and used one. Remember the design uses a fundamental crystal for 28MHz, not a 3rd overtone. The design should work equally well on 24MHz (slightly less chirp too) and 21MHz, although I suspect broadcast breakthough will start to become more of an issue.